Product Documentation
Abstract
IBM System x3550 M2, x3650 M2 - Hot-swap hard drive installation movie
Content
Text from the audio portion of the Ethernet adapter installation movie
To install an Ethernet adapter:
- Insert the ethernet ports into the openings in the chassis and press down on the adapter until seated in the connector.
Install PCI riser-card assembly 1:
- Carefully align the riser card with the connector on the system board and press down until seated.
Install the top cover:
- Position the cover on top of the server using alignment pins on the cover and slots in the chassis for alignment.
- Slide the cover toward the front of the server until it latches in place.
Here is a closer look at an alignment pin on the cover and a slot in the chassis.
For specific instructions for the removal and installation of hardware.
- Problem Determination and Service Guide - IBM System x3550 M2
- Problem Determination and Service Guide - IBM System x3650 M2
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WKC","label":"System x->System x3550 M2->7946"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SMA","label":"System x->System x3550 M3->7944"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5082249