Product Documentation
Abstract
IBM System x3550 M2, x3650 M2 - Hot-swap hard drive removal movie
Content
Text from the audio portion of the Ethernet adapter removal movie
To remove an Ethernet adapter:
- Turn off the server and all peripheral devices, and disconnect all power cords and external cables.
Remove the top cover:
- Press down firmly on the blue tab on top of the cover and slide it to the rear until it disengages from the chassis.
- Lift the cover off the server and set it aside.
Remove PCI riser-card assembly 1:
- Grasp the riser-card assembly at the front tab and rear edge, then lift it from the server and place it on a flat static-protective surface.
Remove the Ethernet adapter:
- Flex the tabs on the adapter bracket outwards, and then rotate the card up and lift it out of the server and set it aside.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WKC","label":"System x->System x3550 M2->7946"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SMA","label":"System x->System x3550 M3->7944"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5082248