Product Documentation
Abstract
IBM System x3550 M2, x3650 M2 - Microprocessor 2 air baffle installation movie
Content
Text from the audio portion of the microprocessor 2 air baffle installation movie
To install the microprocessor 2 air baffle:
- Position the air baffle in the server using the tab on the baffle and the hole in the side of the power supply cage for alignment, then press down until seated.
Here is a closer look at the tab on the baffle and the hole in the Power supply cage
Install the Top Cover:
- Position the cover on top of the server using alignment pins on the cover and slots in the chassis for alignment.
- Slide the cover toward the front of the server until it latches in place.
Here is a closer look at an alignment pin on the cover and a slot in the chassis
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WKC","label":"System x->System x3550 M2->7946"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SMA","label":"System x->System x3550 M3->7944"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5082222