Product Documentation
Abstract
ServeRAID-8k adapter installation movie for the IBM System x3500.
Content
To install the ServeRAID-8k adapter:
If battery replacement is required, mount the battery pack to the chassis, using the two mounting screws.
Install the ServeRAID-8k Adapter:
- Ensure that the latches on each end of the connector are fully open.
- With the adapter keys aligned with the connector, press the adapter into the connector until secured by the latches.
- Connect the battery pack cable into the connector on the adapter.
Install the Left-side Cover:
- Position the channel on the cover over the rail on the bottom edge of the chassis.
- Rotate the cover closed, ensuring the latch secures it in place.
- Lock the side cover, if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW317","label":"System x->System x3500"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075127