Processor installation movie - IBM System x3650 T (Type 7980)

Content

• Movie player help

To install a Processor:

1. Position the processor on the socket using the alignment triangles as a guide and press to seat.
2. Rotate the locking lever to the closed position.

3. Here is a closer look at the triangle on the processor and the triangle on the socket.

4. Position the heat sink on the standoffs using the screw holes for alignment and alternately tighten the four captive screws.

Install the Fan Guard:

1. Place the fan guard in position using the tab on the cover, the slot in the chassis, and the screw holes for alignment and secure with the two captive screws.

2. Here is a closer look at the plastic guide and an alignment pin.

   Here is a closer look at the tab on the cover and the slot in the chassis.

Install the Cover:

1. Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
2. Slide the cover forward until latched in place.

3. Here is a closer look at a cover tab and a slot in the chassis.

• View removal movie
• Return to matrix