Product Documentation
Abstract
SCSI disk drive removal movie for IBM System x3650 T (Type 7980)
Content
To remove a SCSI Hard Disk Drive:
Remove the Bezel:
- Loosen the two captive thumb screws and lift it off.
Remove the SCSI Hard Drive:
- Press in to release the connector lever and rotate to the open position (vertical).
- Squeeze the release latch and rotate the drive tray handle to the open position. Then grasp the handle and pull the drive tray from the bay.
- Turn the drive over and remove the four screws that secure the drive to the tray.
- Turn the drive over and flex the side of the tray to free the drive, and then lift the drive off the tray.
- Use the same procedure to remove any additional drives.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QUOER3S","label":"System x->System x3650 T->7980"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075067