Product Documentation
Abstract
CD/DVD media backplane removal movie for the IBM System x3650.
Content
To remove the CD/DVD media backplane:
Turn off the server and disconnect all power cords and external cables.
Remove the Cover:
- Press in the cover release latch and rotate up while sliding the cover the rear approximately one-half inch.
- Lift the cover off and place to the side.
Remove the Hot-Swap Fan Bracket Assembly:
- Lift up on the two fan bracket levers and lift the bracket out of the chassis and place aside.
Remove the CD/DVD Media Back Plane:
- Disconnect the Operator information panel cable from the system board.
- Press the release tab down to release the drive; then, while pressing the tab push the drive toward the front of the server.
- Disconnect the power and signal cable from the media back plane.
- Remove the two screws and lift the media back plane from the system and place it on an ESD protected surface.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW319","label":"System x->System x3650"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075038