Product Documentation
Abstract
Heat sink filler installation movie for the IBM System x3650.
Content
To install the Heat sink filler:
- Position the filler plate tab into the associated slot in the heat sink bracket and seat.
- Rotate the locking lever to the locked position.
Here's a closer look at the slot in the bracket and the tab on the filler.
Install the Cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position.
Here's a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW319","label":"System x->System x3650"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075024