Product Documentation
Abstract
Hot-Swap fan bracket installation movie for the IBM System x3650.
Content
To install a Hot-Swap hard disk drive:
- Ensure that the bracket levers are in the open position.
- Position the bracket into the chassis using the alignment tabs as a guide.
- Rotate the levers to the locked position and insure that all of the fans are seated
Here's a closer look at the alignment tab and the slot in the chassis.
Install the Cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position.
H ere's a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW319","label":"System x->System x3650"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075017