Product Documentation
Abstract
Riser card assembly installation movie - IBM System x3350
Content
Text from the audio portion of the Riser card assembly installation movie
To install the Riser card assembly
- Position the Riser Card Assembly over the socket, gently press down to seat.
- Insure that the tab on the rear of the assembly is fully seated into the slot in the chassis.
Here's a closer look at the tab on the assembly and the slot in the chassis.
Note: Riser Card 2 is shown. Use the same procedure to install Riser Card 1 if required.
Install the Top Cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward and secure with the single captive screw.
- Rotate the fan door to the closed and latched position.
Here's a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW336","label":"System x->System x3350"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074944