Product Documentation
Abstract
Riser card assembly removal movie - IBM System x3350
Content
Text from the audio portion of the Riser card assembly removal movie
To remove the Riser card assembly
Remove the Top Cover:
- Turn off the server and all peripheral devices and disconnect all power cords and external cables.
- Slide the cover release latches and rotate the Fan Door open.
- Loosen the captive screw on the rear of the chassis.
- Slide the cover towards the rear of the server approximately one half inch and then lift the cover off the server and set it aside.
Remove the Riser Card Assembly:
- Lift the Riser Card Assembly straight up and out of the socket and place it on an ESD protected surface.
Note: Use the same procedure to remove Riser Card 1 if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW336","label":"System x->System x3350"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074943