Product Documentation
Abstract
Air baffle installation movie - IBM System x3350
Content
Text from the audio portion of the Air baffle installation movie
To install the Air baffle
- Position the Cable Air Baffle in the system using the alignment pin as a guide and lower until the pin engages the hole in the system board.
Here is a closer look at the standoff on the baffle and the keyhole slot in the system board.
- Position the Memory Air Baffle in the system using the alignment pins on the chassis and the cable slot as a guide.
Here is a closer look at the front hinge tabs and the slots in the chassis.
- Connect the fan 5 cable.
Install the Top Cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward and secure with the single captive screw.
- Rotate the fan door to the closed and latched position.
Here's a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW336","label":"System x->System x3350"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074942