Product Documentation
Abstract
IBM System x3550 (Type 1013, 1913, 7978) - ServeRAID Controller removal movie
Content
To remove the ServeRAID Controller:
- Turn off the server and all peripheral devices and disconnect all power cords and external cables.
Remove the Top Cover:
- Slide the cover release latches and rotate the Fan Door open.
- Loosen the captive screw on the rear of the chassis.
- Slide the cover towards the rear of the server approximately one half inch and then lift the cover off the server and set it aside.
Remove Riser Card Assembly 1:
- Lift the Riser Card Assembly straight up and out of the socket and place it on an ESD protected surface.
Remove the ServRAID Controller:
- Push out on the two latches and slide the ServeRAID Controller out of the socket. Place it on the ESD protected surface
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02DKY","label":"System x->System x3550->1913"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02QYU","label":"System x->System x3550->1013"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QUOEF4I","label":"System x->System x3550->7978"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074592