Product Documentation
Abstract
IBM System x3550 (Type 1013, 1913, 7978) - Hot-Swap Hard Disk Drive installation movie
Content
To install the Hot-Swap Hard Disk Drive:
- Ensure that the drive tray handle is in the open position.
- Align the drive tray assembly so that it engages the guide rails in the bay.
- Gently push the assembly into the bay until the drive connects to the backplane.
- Rotate the drive tray handle to the closed position.
- Use the same procedure to install any additional drives.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02DKY","label":"System x->System x3550->1913"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02QYU","label":"System x->System x3550->1013"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QUOEF4I","label":"System x->System x3550->7978"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074577