Product Documentation
Abstract
IBM System x3850 M2 (7141, 7144), x3950 M2 (7141) - DVD Housing installation movie
Content
To install the DVD Housing with Interposer Card Assembly:
- Insert the assembly into the server through the front.
- Connect the DVD drive backplane cable.
- Slide the DVD drive into the housing until it latches in place.
- Firmly press the VRM straight down into the connector.
Install the Bezel:
- Position the bezel alignment pins in the matching chassis holes; then, press the bezel in until secured by the latches.
Install the Top Cover:
- Position the cover on top of the server so that the tabs on the cover align with the slots on the chassis.
- Make sure that the cover-release latch is up.
- Slide the top cover forward while pressing the release latch closed.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02YET","label":"System x->System x3850 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02YTZ","label":"System x->System x3850 M2->7144"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03EHM","label":"System x->System x3950 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074568