Power backplane installation movie - IBM System x3850 M2 (7141, 7144), x3950 M2 (7141)

Content

• Movie player help

To install the Power backplane:

1. Position the alignment pins over the matching slots and lower the power backplane into place.
2. Close the blue handle to secure the backplane.

Engage the Power supplies:

1. Push the power supplies into the server to engage them in the power backplane.

Install the Fan cage:

1. Open the cage handles, and position the alignment pins over the matching slots on the chassis.
2. Press the cage into place, and rotate the handles to the closed position to secure the shuttle.

Close the Media hood:

1. Close the media hood and tighten the captive screws.

Install the Top cover:

1. Position the cover on top of the server so that the tabs on the cover align with the slots on the chassis.
2. Make sure that the cover-release latch is up.
3. Slide the top cover forward while pressing the release latch closed.

Install the Bezel:

1. Press in on the bezel retention tabs at the sides of the bezel, and pull the bezel from the server.

• Problem Determination and Service Guide