Product Documentation
Abstract
IBM System x3850 M2 (Type 7141, 7144), x3950 M2 (7141) - Power Backplane removal movie
Content
To remove the Top cover:
- Turn off the server and all peripheral devices and disconnect all power cords and external cables.
- Lift the cover-release latch.
- Slide the cover towards the rear of the server approximately one half inch and then lift the cover off the server and set it aside.
Remove the Bezel:
- Press in on the bezel retention tabs at the sides of the bezel, and pull the bezel from the server.
Open the Media hood:
- Loosen the two captive screws and open the media hood.
Remove the Fan cage:
- Pull up on the cage handles and remove the cage from the server.
Disengage the Power supplies:
- Pull the orange release latch on the handle then rotate the handle to the open position.
- Pull the power supplies out of the server slightly to disengage them from the power backplane.
Remove the Power backplane:
- Pull the blue handle to release the power backplane and lift the backplane from the server.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02YET","label":"System x->System x3850 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02YTZ","label":"System x->System x3850 M2->7144"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03EHM","label":"System x->System x3950 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074538