Product Documentation
Abstract
IBM System x3850 M2 x3850 M2 (7141, 7144), x3950 M2 (7141) - Memory Card Guide installation movie
Content
To install the Memory Card Guide:
- Use the alignment slots to position the memory-card guide and slide it into the server.
- Slide the release latches toward the rear of the server.
Install the Memory Cards:
- Position the memory card in the card guides. Slide the card into the connector and align the ends of the retention levers into the channels; then close both retention levers, seating the card into the socket.
- Slide the orange release latch to the locked position.
Close the media hood:
- Close the media hood and tighten the captive screws.
Install the Bezel:
- Position the cover on top of the server so that the tabs on the cover align with the slots on the chassis.
- Make sure that the cover-release latch is up.
- Slide the top cover forward while pressing the release latch closed.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02YET","label":"System x->System x3850 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02YTZ","label":"System x->System x3850 M2->7144"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03EHM","label":"System x->System x3950 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074528