Product Documentation
Abstract
IBM System x3850 M2 (7141, 7144), x3950 M2 (7141) - DIMM removal movie
Content
To remove the DIMM:
Remove the Top cover:
- Turn off the server and all peripheral devices and disconnect all power cords and external cables.
- Lift the cover-release latch.
- Slide the cover towards the rear of the server approximately one half inch and then lift the cover off the server and set it aside.
Remove the Memory Card:
- Slide the orange release latch to the unlocked position; then, simultaneously rotate the levers open; then, lift card from the server and place it on the ESD protected surface.
Remove the DIMM:
- Push out on the two latches and lift the DIMM out of the socket.
- Place it on the ESD protected surface
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02YET","label":"System x->System x3850 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02YTZ","label":"System x->System x3850 M2->7144"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03EHM","label":"System x->System x3950 M2->7141"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074524