Product Documentation
Abstract
IBM System x3455 air baffle installation movie.
Content
Text from the audio portion of the air baffle installation movie
To install the air baffle
- Position the baffle in the system using the holes in the baffle and the pins in the base for alignment.
- Here is a closer look at a pin in the base and a hole in the baffle.
- Use the same procedure to install the air baffle for microprocessor one if required.
Install the top cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward, ensuring that the channel in the front of the cover engages edge on the chassis, and secure with the single captive screw.
- Here is a closer look at a slot in the chassis and a tab on the cover.
- Here is a closer look at the channel on the front of the cover.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW322","label":"System x->System x3455"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071886