Product Documentation
Abstract
IBM System x3455 air baffle removal movie.
Content
Text from the audio portion of the air baffle removal movie
To remove the air baffle
Remove the top cover:
-
Turn off the server and all peripheral devices and disconnect all power cords and external cables.
-
Loosen the captive screw on the rear of the chassis.
-
Slide the cover towards the rear of the server approximately one half inch and then lift the cover off the server and set it aside.
Remove the air baffle:
- Lift the baffle for microprocessor two up and out of the server and place it aside.
- Use the same procedure to remove the air baffle for microprocessor one if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW322","label":"System x->System x3455"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071885