Product Documentation
Abstract
IBM System x3755 - Power supply structure installation movie
Content
Text from the audio portion of the power supply structure installation movie
To install the power supply structure:
-
Align the structure with the alignment pins on the rear of the chassis and with the connectors on the I/O board, and gently lower the structure into the server.
-
Make sure that the structure is firmly seated in the chassis and push the two blue latches toward the rear of the server until the latches lock the structure into position.
Here is a closer look at the alignment tabs on the structure and the pins on the chassis.
Here is a closer look at the latching action on the power supply structure.
Install the power supplies:
-
With the handle on the power supply in the open position place the power supply into the bay.
-
Rotate the handle to the closed position.
Install the top cover:
-
Position the cover over the chassis, aligning the tabs in the cover with the slots in the chassis.
-
Slide the cover forward while rotating the cover release latch down to the closed position.
Here's a closer look at a cover tab and a slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW324","label":"System x->System x3755"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071789