Product Documentation
Abstract
IBM System x3755 - Hot-swap fan installation movie
Content
Text from the audio portion of the hot-swap fan installation movie
To install a hot-swap fan:
-
With the fan-locking handle in the open position lower the fan into the socket.
-
Ensure the locking handle tabs are engaged in the frame then rotate the handle to the closed position. This will ensure that the connector is fully seated.
Install the top cover:
-
Position the cover over the chassis, aligning the tabs in the cover with the slots in the chassis.
-
Slide the cover forward while rotating the cover release latch down to the closed position.
Here's a closer look at a cover tab and a slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW324","label":"System x->System x3755"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071771