Product Documentation
Abstract
IBM System x3655 - Battery installation movie
Content
Text from the audio portion of the battery installation movie
To install a battery
Position the battery in its housing and press down until secured by the retainer clip.
Install the riser card assembly:
- Carefully align the riser-card assembly with the retention latches, the guides on the rear of the server, and the riser-card connector on the system board, and then press down on the assembly until seated.
Install the top cover:
- Position the cover over the chassis, aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch down to the closed position.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW323","label":"System x->System x3655"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071715