Product Documentation
Abstract
IBM System x3655 - Battery removal movie
Content
Text from the audio portion of the battery removal movie
To remove a battery
Turn off the server and peripheral devices, and disconnect all power cords and external cables.
Remove the top cover:
- Rotate the top cover release latch up and slide the cover approximately one-half inch to the rear.
- Lift the cover off and place it aside.
Remove the riser card assembly:
- Press the two retention latches on the riser-card assembly toward the processor two socket then grasp the assembly at the rear and side edges and lift it from the server.
Remove the battery:
- Using a flat blade probe press the battery retainer clip away from the battery and lift the battery out of the server.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW323","label":"System x->System x3655"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071714