Product Documentation
Abstract
IBM System x3655 - DIMM removal movie
Content
Text from the audio portion of the DIMM removal movie
To remove a DIMM
Turn off the server and peripheral devices, and disconnect all power cords and external cables.
Remove the top cover:
- Rotate the top cover release latch up and slide the cover approximately one-half inch to the rear.
- Lift the cover off and place it aside.
Remove the riser card assembly:
- Press the two retention latches on the riser-card assembly toward the processor two socket then grasp the assembly at the rear and side edges and lift it from the server.
Remove the DIMM:
- Push out on the two latches and lift the DIMM out of the socket and place it on the ESD protected surface.
- Use the same procedure to remove any additional DIMMs if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW323","label":"System x->System x3655"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071710