Product Documentation
Abstract
IBM System x3655 - Front USB cable removal movie
Content
Text from the audio portion of the front USB cable removal movie
To remove a front USB cable
Turn off the server and peripheral devices, and disconnect all power cords and external cables.
Remove the top cover:
- Rotate the top cover release latch up and slide the cover approximately one-half inch to the rear.
- Lift the cover off and place it aside.
Remove the fan bracket assembly:
- Place your thumbs on the metal tabs of the fan-bracket-assembly levers and pinch the tab and blue release latch together.
- Raise the levers, and lift the fan-bracket assembly out of the server.
Remove the front USB cable:
- Disconnect the USB cable from the system board.
- Use a flat blade probe to release the spring clip on one side of the connector and then rotate the connector out of the cutout in the bezel.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW323","label":"System x->System x3655"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071702