Operator information panel assembly removal movie - IBM System x3655

Content

• Movie player help

Text from the audio portion of the operator information panel assembly removal movie

To remove an operator information panel assembly

Turn off the server and peripheral devices, and disconnect all power cords and external cables.

Remove the top cover:

1. Rotate the top cover release latch up and slide the cover approximately one-half inch to the rear.
2. Lift the cover off and place it aside.

Remove the fan bracket assembly:

1. Place your thumbs on the metal tabs of the fan-bracket-assembly levers and pinch the tab and blue release latch together.
2. Raise the levers, and lift the fan-bracket assembly out of the server.

Remove the operator information panel assembly:

1. Disconnect the operator-information-panel ribbon cable from the system board and gently pull up on the cable to separate the Velcro holding the cable to the top of the operator panel housing.
2. Slide the operator-information-panel release latch to the left and pull the panel out of the server as far as it will go.
3. Press the release tabs and pull the panel away from the rails and carefully pull the ribbon cable out of the server.

• Problem Determination and Service Guide