Product Documentation
Abstract
IBM System x3200 - DIMM installation movie
Content
Text from the audio portion of the DIMM installation movie
To install a DIMM
-
Ensure that the retention latches are open.
-
Insert the DIMM straight into the slot, pressing down on both corners of the DIMM at the same time until secured by the latches.
Use the same procedure to install any additional DIMMs.
-
Return the server to its operational position.
Install the side cover:
-
Position the cover over the ledge on the bottom of the chassis.
-
Rotate the cover toward the server until secured by the latch.
-
Lock the cover if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW329","label":"System x->System x3200"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071653