Product Documentation
Abstract
IBM System x3200 - Front USB connector assembly removal movie
Content
Text from the audio portion of the front USB connector assembly removal movie
To remove a front USB connector assembly
Turn off the server and peripheral devices, and disconnect all power cords and external cables.
Remove the side cover:
-
Unlock the side cover if required.
-
Press down on the cover release latch and rotate the top of the cover away from the chassis.
-
Lift the cover off the server and set it aside.
Remove the lower bezel:
- Press the release button on the right side of the lower bezel and rotate the top away from the server and lift it off.
Remove the upper bezel:
- Carefully pull the two bezel clips on the left side away from the chassis, and rotate the upper bezel to the right to disengage it from the chassis.
Place the server on its side, this is the recommended service position.
Remove the front USB connector assembly:
- Disconnect the front USB cable from the system board.
Note: The IDE cable and the adapter retainer have been removed to provide a better view.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW329","label":"System x->System x3200"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071646