Fan installation movie - IBM System x3105

Content

• Movie player help

Text from the audio portion of the fan installation movie

To install the fan

1. Position the fan so that the rubber grommets protrude through the holes in the chassis and use needle-nose pliers to pull the rubber
2. grommets through the holes in the chassis to secure the fan.
3. Connect the fan cable to the system board.

1. Position the air baffle pivot in the slot in the chassis and rotate it down to the closed position.

1. Insert the two hinge tabs on the top of the bezel into the slots in the chassis and then rotate the bottom of the bezel into the chassis until secured by the bezel release tab.
   Here is a closer look at a hinge tab.

1. Place the front edge of the cover into position on the front edge of the server and lower the cover onto the chassis.
2. Slide the cover toward the front of the server and secure with the two thumbscrews.
3. Return the server to its normal operating position.

• Problem Determination and Service Guide