Power supply installation movie - IBM eServer xSeries 366, 460

Content

• Movie player help

Text from the audio portion of the power supply installation movie

To install the power supply:

1. Position the assembly into the chassis using the two alignment pins on the rear-and the one on the front-as a guide to firmly seat the assembly in place.
2. Push the two locking handles toward the rear of the server to secure the assembly in place.

Install the power supply:

1. With the power supply handle up, insert the power supply. Seat the connector by rotating the handle down, and ensure the release latch engages. Then, connect the power cord.

Note: When the power supply is operational, both the AC and DC LED will be lit.

Install the memory card:

1. Insert the card into the machine using the alignment channels along the side of the chassis as a guide.

Install the top cover:

1. Position the cover on the chassis while aligning the tabs on the cover with the slots in the chassis.
2. Slide the cover toward the front of the system, and secure it with the cover-release latch handle.