Product Documentation
Abstract
Instructions for installing the I/O board in any xSeries 366 and xSeries 460 server.
Content
Text from the audio portion of the I/O board installation movie
To install the I/O board:
- Position the I/O board in close proximity to the connector.
- Connect the USB power cable and the Light Path diagnostics cable to the I/O board.
- Align the I/O board with the guides in the server, and slide the board in until it latches into place.
Connect the following cables to the I/O board:
- DVD signal
- 2 SAS signal
Note: Route the cables along side the I/O board so they are not damaged when the cover is installed.
Install the top cover:
- Position the cover on the chassis while aligning the tabs on the cover with the slots in the chassis.
- Slide the cover toward the front of the system, and secure it with the cover-release latch handle.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Y","label":"Older System x->xSeries 366"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW21J","label":"Older System x->xSeries 460"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW21K","label":"Older System x->xSeries MXE 460"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-62945