Product Documentation
Abstract
Instructions for removing the I/O board from any xSeries 366 and xSeries 460 server.
Content
Text from the audio portion of the I/O board removal movie
To remove the I/O board:
- Turn off the server and peripheral devices, and disconnect the power cords.
Remove the top cover:
- Lift the cover-release latch handle.
- Slide the cover to the rear, approximately one-half inch.
- Lift the cover off the server.
Disconnect the following cables from the I/O board:
- 2 SAS signal
- DVD signal
- Light path diagnostics
- Open the release latches located on both ends of the I/O board, and pull the board from the server slightly.
- Disconnect the USB power cable, and the remove the I/O board from the server.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Y","label":"Older System x->xSeries 366"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW21J","label":"Older System x->xSeries 460"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-62943