Product Documentation
Abstract
Instructions for removing the hot-swap hard disk drive from any xSeries 366 and xSeries 460 server.
Content
Text from the audio portion of the hot-swap hard disk drive removal movie
To remove a hot-swap hard disk drive:
- Release the locking latch.
- Rotate the drive tray handle to the open position and wait approximately 30 seconds for the drive to spin down.
- Then, pull the drive from the bay.
Note: Never hot-swap a drive customer replaceable unit, or CRU, when its green Activity LED is flashing. Hot-swap a drive CRU only when its amber Drive Fault LED is on and not flashing, or when the drive is inactive.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Y","label":"Older System x->xSeries 366"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-62742