Product Documentation
Abstract
Instructions for installing the back panel assembly of an xSeries 226 server.
Content
movie is not available.
Text from the audio portion of the back panel installation movie
To install back panel for SATA models:
- Position the back panel over the drive cage using the locating pin and screw holes for alignment.
- Here is a closer look at the back panel to cage alignment.
- Secure with three screws.
- Connect the power cables to the back panel.
- Route the SATA cables through the base of the front fan assembly and connect them to the system board.
- Release the cage assembly latch and rotate to the closed position, while holding the drive cage release latch open.
- Here is a closer look at the drive cage latch.
- Install the side support bracket.
- Return the server to its operational position.
- Install the side cover.
- Install the drive.
- Install the front door.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20N","label":"xSeries 226"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-60003