Product Documentation
Abstract
Instructions for installing the hard drive in an xSeries 226 server.
Content
Text from the audio portion of the hard drive installation movie
To install a SATA drive in bay 4 5, 6, 7, 8, or 9:
- Flex the tray and lower it over the drive, inserting the alignment pins on the tray with the holes in the drive.
- Secure with the 4 screws.
- Align the drive tray with the channels in the drive bay and insert the drive all the way into the bay.
- To remove an empty drive tray grasp the handle and pull the tray from the bay.
- To install another drive: Position the drive tray over the disk using the alignment pins as a guide, and secure with four screws.
- Align the drive tray with the channels in the drive bay and insert the drive all the way into the bay.
- Install the front door.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20N","label":"xSeries 226"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-59950