Product Documentation
Abstract
Instructions for removing the hard drive from an xSeries 226 server.
Content
Text from the audio portion of the hard drive removal movie
To remove a SATA drive from bays 4, 5, 6, 7, 8 or 9:
- Remove the front door.
- Grasp the drive tray handle and pull the drive from the server.
- Remove the 4 screws securing the drive tray to the drive and flex the tray to free the drive. Place the drive on a static protected surface.
Note: Hot Swap SCSI drive models will not have a front door installed. Non hot swap SCSI drive models will require the removal of the side cover to access the drive cables.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20N","label":"xSeries 226"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-59949