Product Documentation
Abstract
Instructions for installing the DVD drive (primary) in an xSeries 336.
Content
Text from the audio portion of the DVD drive (primary) installation movie
To install the DVD:
- Position the DVD release latch on the side of the DVD using the holes on the side for alignment.
- Insert the DVD drive into the bay until secured by the latch.
- Turn the cage assembly over and open the cage release latches.
- Position the assembly into the base of the chassis.
- Rotate the release latches to the closed position, which slides the assembly towards the rear of the machine engaging the tabs in the chassis with the slots on the assembly.
- Close the I/O fan cover and ensure that the latch is locked.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20P","label":"Older System x->xSeries 336"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-57906