Product Documentation
Abstract
Instructions for installing the PCI Cage in an xSeries 336.
Content
Text from the audio portion of the PCI Cage installation movie
To install the Riser Cards:
- Install the low-profile riser card. Insert the riser card straight into the slots and push down until secured by the latches.
- Install the full-length riser card. Insert the riser card straight into the slots and push down until secured by the latches.
-
Close the main cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position.
- Close the processor fan door and ensure that the latch is locked.
- Close the I/O fan door and ensure that the latch is locked.
Here’s a closer look at the cover tab and the slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20P","label":"Older System x->xSeries 336"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-57893