IBM Support

Memory removal movie - IBM eServer xSeries 336

Product Documentation


Abstract

Instructions for removing the memory from an xSeries 336 server.

Content

Text from the audio portion of the memory removal movie

To remove a DIMM:

  1. Open the main cover:
    1. Release the latch for the I/O fan cover and open the cover.
    2. Release the latch for the processor fan cover and open the cover.
    3. Press in the cover release latch and rotate it up while sliding the cover to the rear approximately one-half inch.
    4. Lift the cover off and place it to the side.

  2. Push out on the two latches and lift the DIMM out of the socket.

  3. Place it on the ESD protected surface.

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20P","label":"Older System x->xSeries 336"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-57885

Page Feedback