Product Documentation
Abstract
Movie for the installation of the SMP Expansion Module in the x440
Content
 |
Text description of SMP Expansion Module installation
To install the SMP Expansion Module:
- With the locking levers open, align them over the guides and lower the module into the chassis.
- Close the levers to connect the module.
- Position the shield over the cutout on the chassis and push in the rivets.
- Align the cutout on the retention bracket over the studs on the side of the chassis.
- Slide the bracket down while inserting the tabs into the slots on the top of the module.
- Here is a closer look at the cutout on the bracket and the guide.
- Position the filler block air baffle on the module.
|
View SMP Expansion Module removal movie |
 |
Return to matrix |
For specific instructions for the removal and installation of hardware
 |
Problem Determination and Service Guide for the eServer xSeries 440 |
|
Problem Determination and Service Guide for the eServer xSeries 445 |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW191","label":"Older System x->xSeries 440"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19U","label":"Older System x->xSeries 445"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00QJC","label":"System x->Microsoft Datacenter->8687"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-50664