Product Documentation
Abstract
Movie for the installation of the light path assembly in the x440
Content
 |
Text description of light path assembly installation
To install the light path assembly:
- Connect the cable to the card.
- Route the cable into the retainers on the slide.
- Insert the light path card in the panel and snap the top cover into position.
- Insert the cable into the retainer.
- Guide the cable, slide, and panel through the cutout.
- Push in the panel to set the latch.
- Route the cable through the retainers and secure the strain relief.
|
View Light path assembly removal movie |
 |
Return to matrix |
For specific instructions for the removal and installation of hardware
 |
Problem Determination and Service Guide for the eServer xSeries 440 |
|
Problem Determination and Service Guide for the eServer xSeries 445 |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW191","label":"Older System x->xSeries 440"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19U","label":"Older System x->xSeries 445"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00QJC","label":"System x->Microsoft Datacenter->8687"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-50661