IBM Support

QRadar M5 xSeries Firmware V6.0.0 for 1U and 2U Appliances (IMM/ISO for remote installations)

Release Notes


This firmware update (V6.0.0) provided by IBM updates QRadar® M5 appliances with microcode security fixes and includes updates for UEFI, IMM2, DSA, RAID controllers and a HDD software update. This firmware can be used on all QRadar M5s for both 1U or 2U form factor appliances.


Important: Select a tab to read each step of the firmware procedure.

Part 1: About the M5 Firmware V6.0.0 ISO Update

The M5 firmware update 6.0.0 is intended to remotely update firmware on QRadar appliances. This update adds new firmware versions for UEFI, IMM, raid controller, and hard disk updates. This firmware also resolves several CVEs as outlined in these release notes.

Administrators must update their IMM with the included .UXZ file before they can mount and reboot with the ISO is required to install the firmware update. Updating the IMM2 firmware as the first step prevents installation issues when the core firmware update is applied. The installation instructions on tab named 'Part 2. Installing Firmware Updates'. For more information about QRadar firmware USB instructions, see our FAQ page at

Important: If your appliance is in a HA pair, there are configuration steps required to set the status properly for your primary and secondary high-availability appliances. For more information, see:

Supported appliances, types, and model information


This firmware update applies to the following IBM Security QRadar M5 appliances, server type, or Machine type models:

Appliance Name Server Type Lenovo Server Machine Type IBM Machine Type-Model
IBM QRadar Event Collector 1501 G3 x3550 M5 MT 8869 4412-Q4D
IBM QRadar xx05 G3 x3550 M5 MT 8869 4412-Q1E
IBM QRadar Network Insights 1901 x3550 M5 MT 8869 4412-F4Y
IBM QRadar QFlow Collector 1202/1301 x3550 M5 MT 8869 4412-Q7C
IBM QRadar QFlow Collector 1310 x3550 M5 MT 8869 4412-Q8C
IBM QRadar xx29 x3650 M5 MT 8871 4412-Q2A
IBM QRadar xx48 x3650 M5 MT 8871 4412-Q3B
IBM QRadar Incident Forensics x3650 M5 MT 8871 4412-F1A
IBM QRadar Network Insights 1920 x3650 M5 MT 8871 4412-F3F
IBM QRadar Network Packet Capture x3650 M5 MT 8871 4412-F2C
Table 1: List of appliances that the M5 appliance firmware V6.0.0 can update.

Important file changes and prerequisites in this firmware update


The following table lists the software versions contained within the firmware package. The core change in release V6.0.0 is to provide new UEFI microcode security updates and IMM2 updates for administrators. Administrators must ensure that their M5 appliance includes the minimum version outlined in the Prerequisite version column.

Component Prerequisite version Firmware version in this update File name 
UEFI/BIOS (1U 8869) 2.00 (TBEG22V) tbeg48a-3.30 oem_fw_uefi_tbeg48a-3.30_anyos_32-64.uxz
UEFI/BIOS (2U 8871) 2.00 (TBEG22V) tceg48a-3.30 oem_fw_uefi_tceg48a-3.30_anyos_32-64.uxz
IMM2 3.75 (TCOE26O) tcoe56b-5.70 oem_fw_imm2_tcoe56b-5.70_anyos_noarch
RAID Controller M1215 None 1200-24.21.0-0126-2 lnvgy_fw_raid_mr3.0.1200-24.21.0-0126-2_linux_x86-64.bin
RAID Controller M5210 None 5200-24.21.0-0126-2 lnvgy_fw_raid_mr3.0.5200-24.21.0-0126-2_linux_x86-64.bin
HDD Update  None 1.33.02-0
DSA  None dsalb6s-10.8 lnvgy_fw_dsa_dsalb6s-10.8_anyos_32-64.uxz
Emulex* None 12.40a6-2 elx-lnvgy_fw_fc_lp.08-2.10x6-12.40a6-2_linux_x86-64.bin

Table 2: All firmware version updates are noted in this table.

Security issues resolved in this firmware update

There are not reported CVE mitigations in this release, but several important issues are resolved.

Component File name  CVEs resolved in this package
UEFI/BIOS (for 1U 8869 and 2U 8871) oem_fw_uefi_tbeg48a-3.30_anyos_32-64.uxz
CVE-2020-0591, CVE-2020-0592, CVE-2020-8738, CVE-2020-8740, CVE-2020-8764.

Other enhancements: Adds 2020.2 Intel Platform Update (IPU).
IMM2 oem_fw_imm2_tcoe56b-5.70_anyos_noarch
No CVEs with IMM2 exposure.

Additional firmware changes to address security vulnerabilities in open source packages, but for which there is no IMM2 exposure:
CVE-2019-6111, CVE-2019-6110, CVE-2019-6109, CVE-2019-16905, CVE-2018-20685, CVE-2016-8858, CVE-2016-7407, CVE-2016-6210, CVE-2016-1907, CVE-2016-1235, CVE-2016-10010, CVE-2015-8325, CVE-2015-6565, CVE-2014-9278, CVE-2014-2653, CVE-2014-2532.

Other resolved issues:
  • Fixed a problem where different RAID firmware information presented in IMM2.
  • Fixed a problem where update firmware may fail to enter maintenance mode thru IMM2 with LXCA 2.8.
DSA  lnvgy_fw_dsa_dsalb6s-10.8_anyos_32-64.uxz None

Resolved issues:
  • Modify LUF code due to changes in LUF API2.
  • Fixed a libcurl error when used with proxy.
Emulex* elx-lnvgy_fw_fc_lp.08-2.10x6-12.40a6-2_linux_x86-64.bin
RAID Controller M1215 lnvgy_fw_raid_mr3.0.1200-24.21.0-0126-2_linux_x86-64.bin None

Resolved issues:
  • Incomplete onfi configuration leads to FW HALT. (DCSG00051973)
  • SAS9341-8i board encounters 'Previous configuration completely missing at boot' error. (DCSG00067176)
  • MR 6.14 - MR FW resets the controller on/off property "allowBootWithPinnedCache" on every boot. (DCSG00069702)
  • Unable to import foreign config.(DCSG00041146, a port of defect DCSG00025975)
  • Repeated TASK ABORTS and access to the data store lost. (DCSG00066009, a port of defect DCSG00063321)
  • Cache offload is not getting completed during dummy descriptor configuration. (DCSG00048845)
RAID Controller M5210 lnvgy_fw_raid_mr3.0.5200-24.21.0-0126-2_linux_x86-64.bin None

Resolved issues:
  • Incomplete onfi configuration leads to FW HALT. (DCSG00051973)
  • SAS9341-8i board encounters 'Previous configuration completely missing at boot' error. (DCSG00067176)
  • MR 6.14 - MR FW resets the controller on/off property "allowBootWithPinnedCache" on every boot. (DCSG00069702)
  • Unable to import foreign config. (DCSG00041146, a port Of Defect DCSG00025975)
  • Repeated TASK ABORTS and access to the data store lost.(DCSG00066009, a port Of Defect DCSG00063321)
  • Cache offload is not getting completed during dummy descriptor configuration.(DCSG00048845)
HDD Update  lnvgy_fw_drives_all-1.33.02-0_linux_x86-64.bin None

Table 3: Security issues resolved in the M5 firmware update v6.0.0.


A. Before you begin

This installation method uses the hardware's integrated management module (IMM) to remotely update files.
  • Administrators MUST enable IMM.Over.LAN on the xSeries appliance BEFORE the firmware update is applied. For information on how to enable this setting, see:
  • If your appliances are in a HA pair, you must confirm your high-availability appliance status. For information on setting status on your HA appliances, see
  • A number of hard disk drive updates can be installed by this firmware. The HDD update tool examines the hard disk drive types that are present and selects the most current firmware level that is available based on the drive type automatically.
  • The base system pack contains other firmware packages that are not in QRadar appliances. Therefore, these packages are displayed during the update with a status of "undetected" and not selected to be updated. The administrator can disregard any packages labeled as undetected
  • If the Emulex card firmware does not install as intended or you experience an issue, you can continue the firmware installation and any Emulex issues will be addressed in the next firmware update. If you do not have an Emulex card with your appliance, the installation instructions include a screen capture of the error message that is generated during the firmware installation.


B. Downloading and extracting the firmware update

  1. Download the QRadar M5 appliance firmware update from IBM Fix Central.
    Note: Administrators can select either download link as the firmware download is identical for all QRadar versions.
  2. Copy the M5 appliance firmware EXE to a directory on the Windows™ host.
  3. Double-click the file: Qradar_EXE_ISO_M5_1U_MT8869_x3550_2U_MT8871_x3650_6_0_0.exe.
  4. Select a directory path and click Extract.
    image 8824
  5. The following files are extracted to the Windows host.
    image 8825
  6. Administrators can verify the ISO file is valid after extraction with the included sha256 file.
  • Filename: Qradar_ISO_M5_1U_MT8869_x3550_2U_MT8871_x3650_6_0_0.iso
  • Algorithm: SHA256
  • Hash: DFE4B2BA59AB1D1C8761FE0027B3649FEB0DC2E9C21C25AF1267D54BE6086459


C. Updating the IMM firmware

  1. Log in to the IMM interface on your QRadar M5 appliance.
  2. Select Server Management > Server Firmware from the menu.
  3. Click Update Firmware

  4. Click Select File and browser to the IMM2 firmware update: oem_fw_imm2_tcoe56b-5.70_anyos_noarch.uxz.
    image 8826
  5. Click Next to upload and verify the IMM2 firmware file.
    image 8828
  6. Wait for the update the primary and secondary firmware banks to complete.
  7. Click Restart IMM and clear your browser cache.

    After the IMM interface reboots, log in to the IMM and continue to the next section to mount the firmware ISO and configure the boot options.


D. Mounting the M5 Firmware ISO & Reboot Procedure

  1. Click Remote Control.
    image 8829
  2. To start the Remote Control session click use Active X for Internet Explorer or Java for all other Browsers.
  3. Click on Start Remote Control in Single User Mode.
    NOTE: Administrators should always use single user mode for remote connections for updates.
  4. Administrators should leave the Allow others to request my remote session disconnect check box clear. It is not recommended for administrators to allow other users to request the active session for firmware updates.
  5. From the menu, select Virtual Media > Activate.
    image 8830
  6. From the menu, select Virtual Media > Select Devices to Mount.
    image 8831
  7. From the Devices window click on Add Image.

  8. Select the ISO image and click Open.
    image 8832
  9. Select the CD/DVD with the ISO filename and verify that the Mapped check box is selected.

  10. Click Mount Selected.
  11. Reboot the appliance to start the firmware installation.
  12. As the appliance starts, press the F12 key to select a boot device.

  13. At the Boot Devices Manager window use the arrow keys to navigate.
  14. Administrators must clear the Legacy Mode check box, then select the CD/DVDM option and press ENTER.

  15. The boot screen for the appliance is displayed. The IBM ToolsCenter Welcome page is displayed.

  16. When prompted, select the Updates option.

  17. Verify that the Updates list shows the correct machine type for the appliance.
    Hardware Details
    Server Type x3550 M5
    x3650 M5
    Server Machine Type MT 8869
    MT 8871
    NOTE: For example, System x3650 M5 -- machine type 8871.
  18. To start the update link, select click here to start update.
  19. Select your language and click I accept the terms in the license agreement to continue.

  20. The IBM UpdateXpress System Pack Installer compares the current package with the installed firmware.
  21. Important: Verify that all check boxes are selected to complete the required updates. Some users have reported issues where uEFI updates were not selected by default. All new version updates must be checked to ensure they install.
  22. If your M5 appliance has a secondary firmware bank it is updated automatically.
    Important: Administrators should be aware that if you are prompted with a Target the secondary firmware bank check box, you should click Next without selecting this option. If you target the secondary firmware back the installer will IGNORE the firmware update to the primary bank and the installation will need to be reapplied to update the primary firmware bank for the appliance.
  23. To start applying the updates, click Next on the Update Options page.
  24. Verify that all the firmware updates are applied, and click Next to complete the update.
  25. After the update is complete, click Save Log to save the installation log to the USB flash drive. This file can be provided to support in case any issues occurred during the update.
  26. Select the USB flash drive and click OK.
  27. When all updates are complete, click Finish to reboot the appliance.

    Wait for the appliance to reboot. After any UEFI update, administrators should allow the appliance to boot past the F1 prompt to ensures that all updates are installed.  



If you have any issues with the appliance booting or with firmware update problems, you can open a case with QRadar Support. If you have issues with the appliance booting after you update firmware, attach your update collect preboot DSA logs from the QRadar appliance.
Emulex Update Error Messages
The firmware installer might issue an Emulex error to administrators that can be ignored. Not all QRadar M5 appliances ship with an Emulex card. The firmware update contains software to attempt to update the Emulex drivers; however, if the appliance does not include an Emulex, an installation error will be displayed, "Install did not succeed".



Note: Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.

[{"Line of Business":{"code":"LOB24","label":"Security Software"},"Business Unit":{"code":"BU008","label":"Security"},"Product":{"code":"SSBQAC","label":"IBM Security QRadar SIEM"},"ARM Category":[{"code":"a8m0z000000cwtcAAA","label":"Hardware"}],"ARM Case Number":"","Platform":[{"code":"PF016","label":"Linux"}],"Version":"All Version(s)"}]

Document Information

Modified date:
01 April 2021