Fix Readme
Abstract
On 18 March 2020, On 30 October 2020, IBM released IBM® Maximo® for Nuclear Power 7.6.1.0 interim fix 023. As with all interim fixes, it is cumulative. In addition to the new fixes listed here, all fixes from earlier interim fix releases for this Feature Pack are included.
Content
Maximo for Nuclear Power 7.6.1.0 interim fix 023 is available at Fix Central.
Note: The APARs listed here are the complete set of APARs fixed in Maximo for Nuclear Power 7.6.1.0 interim fix 023, not only the ones added since the release of Maximo for Nuclear Power 7.6.1.0 interim fix 022.
| APAR |
Application Name |
Description |
|---|---|---|
| IJ02040 |
Reading Frequencies (Nuc) |
Cannot create a frequency reading with cycle weeks and target times. |
| IJ01958 |
Clearances (Nuc) |
In the Clearances (Nuc) application, there are multiple problems with the PLUSCLEARANCE.TEMPLIFTCL field and its related locking functionalities. |
| IJ01959 |
Clearances (Nuc) |
In the Clearances (Nuc) application, correct problems in the Temp Lift Tagging Activities dialog box with temp lifts that are in REAPPLY status. |
| IJ01961 |
Clearances (Nuc) |
The "Part of Temp Lift" field PLUSCLEARANCE.TEMPLIFTCL is now reset to F when the Temp Lift moves to COMP status. |
| IJ01962 |
Clearances (Nuc) |
In Clearances (Nuc) application, temp lift tags are incorrectly displayed on the Restore Tags tab after you clear the smart filter. |
| IJ01963 |
Clearances (Nuc) |
In Clearances (Nuc) application, need an updated user message when attempting to perform Craft Approval prior to Temp Lift approval. |
| IJ01965 |
Clearances (Nuc) |
In Clearances (Nuc) application, correct problems in the Temp Lift Tagging Activities dialog box with RESTORE status Temp Lifts. |
| IJ02073 |
Clearances (Nuc) |
In Clearances (Nuc) application, correct problems in the Temp Lift where the Tagging Activity cannot be restored because the tag is not available in Verify Restored Tags tab. |
| IJ02074 |
Clearances (Nuc) |
In Clearances (Nuc) application, corrects conflict that occurs when changing Temp Lift from status WAPPR to APPR |
| IJ02092 |
Clearances (Nuc) |
In Clearances (Nuc) application, when maxvar is set to automatically transfer all Temp Lift Tags during craft approval, the tags were not transfered to Work Order. |
| IJ02093 |
Clearances (Nuc) |
In Clearances (Nuc) application, Tag Off Restoration By and Tag Off Restoration IV Fields are not being set after adding TEMPADD Temp Lift Tag. |
| IJ02094 |
Clearances (Nuc) |
In Clearances (Nuc) application, cannot set Temp Lift Tags in REAPPLY status . |
| IJ02106 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you can reapply tags on the same location after all TEMPADD tags are restored. |
| IJ02108 |
Clearances (Nuc) |
In the Clearances (Nuc) application, on the Restore Tags tab, when you open the Tagging Activities dialog box and remove TEMPADD tags, temp lift tags are displayed incorrectly. |
| IJ02109 |
Clearances (Nuc) |
In the Clearances (Nuc) application, after all tagging activities are completed, temp lifts stay in RESTORED status. |
| IJ02110 |
Clearances (Nuc) |
In the Clearances (Nuc) application, for tags in the same location, you cannot reapply TEMPLIFT tags, even though all TEMPADD tags are restored. |
| IV99776 |
Condition Reports (Nuc) |
In the Condition Reports (Nuc) application, the future date can be set to the actual start date. |
| IJ01959 |
Clearances (Nuc) |
n the Clearances (Nuc) application, correct problems in the Temp Lift Tagging Activities dialog box with temp lifts that are in REAPPLY status. |
| IJ01537 |
Duty Stations (Nuc) |
In the Duty Stations application, readings that were previously taken and committed are being overwritten by the Maximo Anywhere Operator Rounds application when data is |
| IV98820 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when a clearance record has location conflicts, the Next Page button on the Check Conflicts dialog box does not work. |
| IJ00944 |
Terms and Conditions (Nuc) |
In the Terms and Conditions application, quality terms and conditions are not appearing on the purchasing documents after the quality terms and conditions are associated to the |
| IJ02333 |
Unassigned |
In the Duty Station Rounds application the Routine Readings sub tab is not sorting by Due Date and Sequence. |
| IJ00352 |
Duty Station Plans (Nuc) |
In the Duty Stations (Nuc) application, cycle frequencies do not work properly. |
| IJ02470 |
Reading Frequencies (Nuc) |
In the Reading Frequencies (Nuc) application, the cycle week calculation is not correct. |
| IJ02366 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, you cannot use the Commit All action for on demand readings. |
| IJ02046 |
Duty Stations (Nuc) |
In the Duty Stations application, the Duty Station Inspector field becomes empty after a reading is committed. |
| IJ02269 |
Install |
Demo data exists in environments where ISDEMO is set to 0, and where demo data was not set up to be loaded. The script, 7510_11.dbc, produces this result. |
| IJ02865 |
Duty Stations (Nuc) |
Duty Station readings not calculating for the correct cycle week. |
| IJ02967 |
Clearances (Nuc) |
In the Clearances application, when you change the status of a tag to Applied on a Temp Lift, the status change is incomplete. This prevents normal progress of a Clearance to |
| IJ02968 |
Clearances (Nuc) |
In the Clearances application, when a WO is processed with the Temp Lift, a problem occurs when you reapply a Shared Tag on a REAPPLY status Temp Lift. |
| IJ02974 |
Clearances (Nuc) |
In the Clearances application, on the Tags for Temp Lift XX table window, when you use the Block\Unblock Temp Lift Work Orders button, the focus does not remain on the correct |
| IJ02989 |
Clearances (Nuc) |
In the Clearances application, an improper manual selection option is provided to move a Temp Lift from READY to ACTIVE status. |
| IJ02990 |
Clearances (Nuc) |
In the Clearances application, the Link Affected Clearances dialog does not add all selected records. |
| IJ02991 |
Clearances (Nuc) |
In the Clearances application, the automated status change from APPR to Ready for Related Clearances is not working. |
| IJ03132 |
Clearances (Nuc) |
To improve usability, the View/Accept Boundary Revision dialog box is streamlined. The OK button is replaced by the Accept Revision button. After you click Accept Revision, the |
| IJ03131 |
Clearances Kiosk (Nuc) |
In the Clearances Kiosk (Nuc) application, you can update tags that are part of a temp lift. With the Clearance Tags tab that is added, you can apply tags, verify applied tags, |
| IJ02992 |
Clearances (Nuc) |
In the Clearances application, when multiple users are updating tag status and sharing status simultaneously in different browser sessions, clearance records in DRAFT status |
| IJ02993 |
Clearances (Nuc) |
In the Clearances application, when you open the Tagging Activities dialog box to remove TEMPADD tags, Temp lift tags display incorrectly on the Restore Tags tab. |
| IJ02994 |
Clearances (Nuc) |
In the Clearances application, a validation that is not required is performed on a TEMPLIFTHOLD = T tag in DRAFT status. |
| IJ02995 |
Work Order Tracking (Nuc) |
In the Work Order Tracking application, work orders associated with revision plans can be cancelled. |
| IJ02996 |
Clearances (Nuc) |
In the Clearances application, after a tag is selected and reapplied on a temp lift, it cannot be selected for a second temp lift on that clearance record. |
| IJ02997 |
Clearances (Nuc) |
In the Clearances application, you can move a temp lift from REAPPLY status to ACTIVE status, when that temp lift was not previously in ACTIVE status. |
| IJ03088 |
Work Order Tracking (Nuc) |
In the Work Order Tracking application, on the Clearances tab, when you click the Sign Off check box and select the Save button, the record is not saved and the Saved button no |
| IJ03089 |
Clearances (Nuc) |
In the Clearances application, you cannot edit the IV Required checkbox for Temp Lift tag rows. |
| IJ03090 |
Clearances (Nuc) |
In the Clearances application, temp lifts stay at a RESTORE status after all tagging activities are finished. |
| IJ03092 |
Clearances (Nuc) |
In the Clearances application, when you duplicate a clearance record, tags of revision plans are not copied. |
| IJ03094 |
Clearances (Nuc) |
In the Clearances application, scenarios related to temp lifts still use the old View/Accept Boundary Revision dialog box. |
| IJ03129 |
Clearances (Nuc) |
The Skip Changes to Other Tags functionality indicates that Operations has determined that satisfactory worker protection is provided by the set of clearance tags that are |
| IJ03133 |
Work Order Tracking (Nuc) |
To improve usability in the More Actions menu, the following changes are implemented: Below the action Copy Doclinks to Work Order and above the action Craft Approval, a static |
| IJ02965 |
Clearances (Nuc) |
In the Clearances application, on the Temp Lift Tagging Activities dialog, the soft filter does not work correctly. |
| IJ02966 |
Clearances (Nuc) |
In the Clearances application, when you change the status of a tag to RESTORED on a Temp Lift, the status change is incomplete. This prevents normal completion of the |
| IJ02969 |
Clearances (Nuc) |
In the Clearances application, a RESTORE status clearance record is stranded in RESTORE status by a Temp Lift . |
| IJ02970 |
Clearances (Nuc) |
In the Clearances application, a field Pending Acceptance of Boundary Revision is not checked when approve boundary revision is required. |
| IJ02972 |
Clearances (Nuc) |
In the Clearances application, the Apply Tags dialog box does not work correctly. It displays Active status Shared tags when the Shared tag is already on a READY status |
| IJ02976 |
Work Order Tracking (Nuc) |
In the Work Order Tracking application, you can delete a work order that is associated to a revision plan. |
| IJ02978 |
Clearances (Nuc) |
In the Clearances application, the Change Status dialog box does not close when you click on an error message. |
| IJ02980 |
Clearances (Nuc) |
In the Clearances application, when you create a Working or Admin clearance from template, Tagging Official Authorization information of the WAPPR revision plan is not copied |
| IJ02981 |
Clearances (Nuc) |
In the Clearances application, a clearance record can simultaneously participate in two In Progress Temp Lifts. |
| IJ02984 |
Clearances (Nuc) |
In the Clearances application, in the Modify WO Tag Transfer dialog, the wrong tag is displayed. |
| IJ02986 |
Clearances (Nuc) |
In the Clearances application, you cannot add a valid tag to a Location on a Revision Plan, when the Location previously held a tag that is now RESTORED. |
| IJ03191 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, the duty station cycle week is not calculated correctly after omitting rounds. |
| IJ02964 |
Clearances (Nuc) |
In the Clearances application, you cannot restore a TEMPADD status tag to RESTORED status. |
| IJ03667 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, when you change the Clearance Request status without choosing a new status, Maximo displays an error message. |
| IJ02269 |
Install |
Demo data exists in environments where ISDEMO is set to 0, and where demo data was not set up to be loaded. The script, 7510_11.dbc, produces this result. |
| IJ03482 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, synonym values created in the PLUSCLRQSTATUS domain are not available for selection in the Change Status dialog box. |
| IJ03542 |
Duty Stations (Nuc) |
In the Duty Station Plans (Nuc) application, there are issues with Rounds Scheduling on bi-weekly rounds. The next due date is miscalculated and the active date is the last |
| IJ03675 |
Duty Stations (Nuc) |
In the Duty Station (Nuc) application, readings that have a cycle frequency of a week are creating incorrect due dates. |
| IJ03795 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when the Tag Off Seq # field is set to 1 on a shared tag, an error occurs. |
| IJ04112 |
Clearances (Nuc) |
In the Clearances (Nuc) application, teh Check Conflict dialog box does not identify valid conflicts on an SQL server environment. |
| IJ04114 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you accept a boundary revision, tags are not released to the lifted in a temp lift. |
| IJ04119 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when the Skip Changes property is set to true, a tag that is added to a clearance revision is incorrectly added to an associated work |
| IJ04024 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you select the Check Temp Lift action, temp lifts at an In Progress status are not identified. |
| IJ04117 |
Clearances (Nuc) |
In the Clearances (Nuc) application, a work order with a tag transfer that is added to a revision plan incorrectly requires an accept boundary revision before it can be |
| IJ04025 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you add a new row to a tag revision and save the revision, an error occurs. |
| IJ04113 |
Clearances (Nuc) |
In the Clearances (Nuc) application, fields are missing from the Check Temp Lifts dialog box. |
| IJ04108 |
Clearances (Nuc) |
In the Clearances application, you cannot associate a work order to a revision plan, remove the association, and then re-associate the work order. |
| IJ04116 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you create a second temp lift using the same tag on the same Clearance record, errors occur. |
| IJ04109 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when a clearance is at a DRAFT status, you cannot relate a permit to a clearance record using the Select Work Order button. |
| IJ04120 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Skip Change field display is not included in the summary row for displayed locations. |
| IJ04026 |
Clearances (Nuc) |
In the Clearances (Nuc) application, Tagging Official Authorization is incorrect for clearance record at a DRAFT status. |
| IJ04029 |
Clearances (Nuc) |
In the Work Order Tracking (Nuc) application, when you accept a revision in the View/Accept Revision dialog box, the Pending Acceptance check box is not cleared. |
| IJ04027 |
Clearances (Nuc) |
In the Clearances (Nuc) application, records on the Sign On/Off table are created from work orders that do not have craft approval. |
| IJ04049 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when a shift supervisor approves a revision, the Share Tags dialog box does not display. |
| IJ04050 |
Clearances (Nuc) |
In the Work Order Tracking application, when the Skip Changes property is set to true, when you accept a boundary revision and approve the work order, an error occurs. |
| IJ04028 |
Clearances (Nuc) |
In the Clearances (Nuc) application, after you verify restored tags, the Application By, Restoration By, and Restoration IV By fields are set incorrectly. |
| IJ04022 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you change the status of a temp lift to WAPPR, an error occurs. |
| IJ04030 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you create a new record, the Tagging Activities menu is incorrectly displayed. |
| IJ04284 |
Organizations (Nuc) |
In the Clearances (Nuc) application, the Prevent Multiple Tags process results in an error when the same location is used. |
| IJ04419 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, you cannot edit custom fields when the PLUSCLRQ status is active. |
| IJ04076 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you load data in the PLUSTAG table, a null pointer exception occurs. |
| IJ04929 |
Clearances (Nuc) |
In the Clearances (Nuc) application, on a clearance revision, the Modify Work Order Tag Transfer does not work as expected. |
| IJ04991 |
Clearances (Nuc) |
In the Clearances (Nuc) application, fields in the Modify Work Order Tag Transfer dialog box are editable. |
| IJ04992 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, when a user approves a craft, another user can overwrite the approval without creating a new record. |
| IJ04973 |
Clearances (Nuc) |
In the Work Order tracking (Nuc) application, a clearance request at a WAPPR status cannot be changed back to a status of DRAFT. |
| IJ04954 |
Clearances (Nuc) |
In the Work Order Tracking (Nuc) application, when you change the status of a clearance request, all fields for the clearance request are editable. |
| IJ03667 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, when you change the Clearance Request status without choosing a new status, Maximo displays an error message. |
| IJ04953 |
Clearances (Nuc) |
In the Clearances application, when you change a clearance revision from WAPPR to APPR, the following error occurs: BMXAK0212E - The current clearance revision must be approved |
| IJ04923 |
Clearances (Nuc) |
In the Clearances (Nuc) application, clearances do not support a standard status change process. |
| IJ02089 |
Clearances (Nuc) |
Restoration tab auto sorting in Clearance application behaves erratically |
| IJ05890 |
Clearances (Nuc) |
Error when try to add a clearance log |
| IJ05888 |
Clearances (Nuc) |
REGRESSION - Can't change status of a Temp Lift row to APPR - error message displayed |
| IJ05911 |
Clearances (Nuc) |
Performance issue in some Clearance scenarios |
| IJ05892 |
Clearances (Nuc) |
Performance issue when revising Clearances |
| IJ05913 |
Clearances (Nuc) |
Message display incorrectly when change CL revision from WAPPR to APPR |
| IJ05839 |
Clearances (Nuc) |
Maximo does not allow to do Tag Transfer at Clearance DRAFT status |
| IJ06042 |
Clearances (Nuc) |
Get unexpected error when change CL revision status to APPR |
| IJ06231 |
Clearances (Nuc) |
In the Clearances application, you can't use the workflow icon to change the status of a record. |
| IJ06230 |
Clearances (Nuc) |
In the MAXATTRIBUTE and MAXATTRIBUTECFG tables, a select statement finds duplicate primary key columns for the PLUSWOCLLINKAPPRREC object. |
| IJ06041 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Sign On/Off tab displays work orders that are from the same site as the clearance record only. |
| IJ06463 |
Clearances (Nuc) |
In revision 1 of a clearance record, you can't change the status from WAPPR to APPR when an attached work order doesn't have craft approval and is from a different site. |
| IJ06086 |
Work Order Tracking (Nuc) |
In the Work Order Tracking application, you can't change the status of a work order's clearance request to DRAFT. |
| IJ06165 |
Clearances (Nuc) |
In the Clearances (Nuc) application, a comment added to a tag in a clearance record isn't copied to the PLUSTAG.APPCOMMENT4UI field. |
| IJ06215 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Save Record option takes over 1 minute to save a record. |
| IJ07031 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot undo a work order removal in clearance revision 0 while clearance revision 1 is at a DRAFT status. |
| IJ07029 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot cancel a Clearance record while the record is at DRAFT status. |
| IJ06448 |
Permits (Nuc) |
In the Permits (Nuc) application, the Advanced Search screen displays work types instead of permit types. |
| IJ06335 |
Item Master (Nuc) |
In the Item Master (Nuc) application the PLUSPROC attribute does not validate when you import item records. |
| IJ06634 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you search on a site and a location on the List tab, the search takes a long time to return results. |
| IJ06715 |
Clearances (Nuc) |
After you install a Maximo for Nuclear Power interim fix, an error occurs when you change the status of a Clearance record. |
| IJ06701 |
Clearances (Nuc) |
In the Clearances (Nuc) application, tags are not transferred to work orders. |
| IJ07016 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot execute a Craft Approval on a Clearance record revision 0 in ACTIVE status, while Clearance revision 1 is in DRAFT status. |
| IJ06631 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you restore a tag that has a NOTCTRL position, the following error occurs: BMXAK0198E - This tag cannot be restored. It is currently being used by other clearances. |
| IJ07001 |
Escalations |
In the Escalations application, you cannot change a status using an Escalation if the target status is not a synonym of the actual status, for example from WAPPR to APPR. |
| IJ07721 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the same user can apply and verify a tag. |
| IJ06861 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you remove a work order from the More Actions menu, the error message that is displayed is unclear. |
| IJ06321 |
Changes (Nuc) |
In the Changes (Nuc) application, when you use the look up on the Change Type field, invalid bindings are in the list. |
| IJ07718 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you create a clearance revision, some read only fields are editable. |
| IJ06827 |
Duty Station Plans (Nuc) |
In the Duty Stations Plans ( Nuc) application, when you revise a Duty Station Plan record, the description from the original record does not get copied to the new revision. |
| IJ07719 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you open a work order tag transfer, no tags are selected. |
| IJ07720 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot do a work order tag transfer. |
| IJ07972 |
Purchase Requisitions (Nuc) |
In the Purchase Requisitions application, when you load data for purchase requisitions, the business rules open multiple database cursors. |
| IJ08202 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, the Key Components table does not display Event Details and the Event Time from the most recent Narrative Log entry in the PLUSDUTYLOGCOMPONENT table. |
| IJ08279 |
Condition Reports (Nuc) |
In the Condition Reports (Nuc) application, when you duplicate a condition report card, clicking No on the BMXAA5328W message results in the same as clicking Yes for the message. |
| IJ07903 |
Duty Stations (Nuc) |
In the Duty Stations application, INACTIVE On-Demand Process can be selected and added to Duty Stations. |
| IJ07942 |
Purchase Requisitions (Nuc) |
In the Purchase Requisitions (Nuc) application, when you create a Desktop Requisition that is a Direct Issue the item technical terms do not carry over the purchase requisition. |
| IJ09200 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when there is a clearance revision, tags are not automatically transferred to the work order. |
| IJ06634 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you search on a site and a location on the List tab, the search takes a long time to return results. |
| IJ08256 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, you cannot change the work order status to complete even if the work order was released from a clearance. |
| IJ08169 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you add a new craft approval and then close the Craft Approval window, if you open the Craft Approval select action again, the added craft approval does not display. |
| IJ08066 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot update custom fields in the current clearance while the clearance revision is in draft status. |
| IJ08696 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, when creating a condition report from an unsatisfactory reading, two condition reports are created. One of the reports has the information you added and the other does not. There should only be one condition report created, and that one should have the information that you added. |
| IJ08936 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, when creating a revision from a prior plan, reading and attachment data should be retained, but it is not retained. |
| IJ09188 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if there is a revision to a work order, craft approval should be required, but it is not checked. |
| IJ08878 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the View/Modify Revision Sequence window displays tags that are not part of the revision. |
| IJ09216 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you establish several clearance or large tag counts and then process each clearance through the life cycle, several of the operations have excessive response times. |
| IJ08443 |
Clearances (Nuc) |
In the Clearances (Nuc) application, in the View/Modify Revision Sequence window, when you set the revision sequence, you receive an error that says that the revision sequence is not allowed. |
| IJ09187 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, you cannot save a narrative entry on the Narrative Log tab in the ALLENTRIES table. |
| IJ08074 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you duplicate a clearance, you receive an error that says that the value null could not be set during the MBO copy operation. |
| IJ09319 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, when accepting a boundary revision in the View/Accept Boundary Revision window, you receive an error that says that the work order has been updated by another user. |
| IJ10629 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you can cancel clearance revisions that have a Draft status, and were not promoted to Approved status. The clearance revision must not contain one or more tags that are not shared by the current clearance. If the clearance revision was created from a revision plan, the clearance revision can be canceled. The revision plan can then be reused. If a work order is associated with the clearance revision, the related work order must be removed from the clearance revision. |
| IJ10627 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot restore tags that are associated with multiple clearances. |
| IJ09788 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot sort the sequence of tags in an XML file. |
| IJ10674 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you share tags, an error message is displayed. |
| IJ09664 |
Purchase Orders (Nuc) |
In the Purchase Orders (Nuc) application, when you use MIF to revise a purchase order, the purchase order term is duplicated. |
| IJ10162 |
Inventory (Nuc) |
In the Inventory (Nuc) application, when you reorder direct issue items or services, an error message is displayed. |
| IJ11522 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you open a work order and select Accept Boundary Revision, clearance data is editable. |
| IJ10654 |
Clearances (Nuc) |
In the Clearances (Nuc) Application, a clearance status is changed to READY status while the tags remain in DRAFT status. |
| IJ11566 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you authorize large clearances, Maximo hangs. |
| IJ11028 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the following errors occur: BMXAK0867E and BMXAK0146E. |
| IJ11115 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, for completed or closed Duty Station Shift records, in the Rounds tab in the Previous Reading section, readings that were taken after the shift finish are displayed. |
| IJ11233 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot change the tag status on the Restoration tab. |
| IJ11467 |
Clearances (Nuc) |
In the Clearances (Nuc) application, in a clearance revision that has a status of draft, you cannot set the Tag Restoration position until the tag status is at Pending. |
| IJ11571 |
Clearances (Nuc) |
In the Clearances (Nuc) application, in the Share Tag dialog, when you select a tag on the Shareable Tags for Tag table, the following error occurs: BMXAA0031E - The PLUSTAG object is read only. Verify the business rules for the MBO or MBOSet object. |
| IJ11446 |
Clearances (Nuc) |
In the Clearances (Nuc) application, a conflict exists between clearances and locations with the same location and position but one uses a synonym of the Danger tag type. |
| IJ11510 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you add a work order to an existing Clearance, it takes several minutes for the listing to appear and may even time out due to the amount of data in the database. It looks as if it is pulling all work orders. |
| IJ11448 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Tagging Activities dialog box hangs. |
| IJ11521 |
Clearances (Nuc) |
In the Clearances (Nuc) application, after you verify a restoration, clearances are not going to WSHARE. |
| IJ11378 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, when you omit a reading, the following error occurs: BMXAA4210E - Database error number 17401 has occurred. Invalid SQL queries are logged in the log file. Check the SQL query to identify the error. |
| IJ11106 |
Clearances (Nuc) |
In the Clearances (Nuc) application, clearance status values are populating as READY instead of the default EROTTETU status. |
| IJ11558 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you must apply a sequence and restoration tags for all tags. |
| IJ10709 |
Condition Reports (Nuc) |
In the Condition Reports (Nuc) application, when you search by status, an incorrect result set is returned. |
| IJ11498 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, when the condition of a key component that has an exempt status is set to STARTED, the lead hours and lag hours for the associated round location is set to 0. |
| IJ02269 |
Install |
Demo data exists in some non-demo environments. |
| IJ00185 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, when you start a duty station that includes readings and at least one condition monitoring value, on the Rounds tab, if you select the Row Commit button to commit any readings, the readings are not committed and no error message displays. |
| IJ12486 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you have the Maximo for Nuclear Power 7.6.1.0 IF012 fix pack installed, when you create a clearance record and a revision for that clearance record and then install the Maximo Nuclear Power 7.6.1.0 IF013 fix pack, the Cancel Revision status is not available in the Change Status dialog box for the clearance revision. Additionally, if you attempt to cancel the clearance revision by using a workflow, an error occurs. |
| IJ12585 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you select the Advanced Search button and then select the Detail Menu icon for the Tagged Location and Tagged Asset fields, the select value option does not work. |
| IJ12140 |
Clearances (Nuc) |
In the Clearances (Nuc) application, tag position conflicts are not detected when the automated conflict check is completed. |
| IJ12584 |
Clearances (Nuc) |
In the Clearances (Nuc) application, on the Restore Tags tab, tags that do not need to be restored are listed. |
| IJ11820 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you create a clearance that includes hundreds of tags that are not shared, and you select the Restore Tags action, it takes several minutes for the dialog box to open. |
| IJ12588 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you add a tag to a clearance and then change the status of the clearance from WAPPR to APPR, on the Verify Applied Tags tab, the tag is in the DRAFT status and is not applied. |
| IJ12586 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you change the status of a clearance without selecting a status value, an error occurs. |
| IJ09788 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot sort the sequence of tags in an XML file. |
| IJ12525 |
Purchase Orders (Nuc) |
In the Purchase Orders (Nuc) application, if you create a purchase order that includes multiple purchase order lines and add an item to a purchase order line, when you select another field on the Item tab or leave the field by using the Tab key, look ups are generated in the log file for every purchase order line in the purchase order lines table. |
| IJ13580 |
Database Data |
In IBM Maximo for Nuclear Power version 7.6.1.0, the PLUSAFC domain has a scale of 1 instead of a scale of 0. |
| IJ12925 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you duplicate a clearance that was created by another user, in the duplicate, the Created By field is not updated with your information. |
| IJ14000 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you select the Route Workflow button, the Check Conflicts dialog box is not displayed although status of the clearance is changed to APPR. |
| IJ12801 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you duplicate a clearance, the duplicated tags are retaining the application, restoration, and independent verification data from the tags that were copied. |
| IJ12664 |
Clearances (Nuc) |
In the Clearances (Nuc) application, errors occur if the status of active revisions on a clearance does not match, and the revisions can become stuck at that current status. |
| IJ13019 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you duplicate clearances, the tag types might not be correctly shared when the statuses of the duplicate clearances are changed to READY. |
| IJ14131 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you update the position of a revision application tag in the Revision Sequence dialog box, an error occurs. |
| IJ12078 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, if you enter and commit a reading, complete or close the duty station shift record, and then exit and reopen the record, on Rounds tab, on the Routine Readings sub tab, the reading is not displayed. |
| IJ12662 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you uncheck a tag for a clearance and then do not close the Tagging Activities dialog box, in another Maximo session, you can set the status of the same clearance to READY. |
| IJ13318 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Application IV Required check box is not editable when the clearance is in the WAPPR status. |
| IJ12669 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you create duplicates of a clearance, some of those duplicates cannot be moved from the WSHARE status although all tags are restored to the duplicates. |
| IJ13062 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, rounds are not automatically scheduled according to the specified reading frequency. |
| IJ15071 |
Clearances (Nuc) |
In the Clearances (nuc) application, when you add or remove a tag, the focus remains on the current page unless a page is created or deleted as a result. |
| IJ15073 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when a clearance is complete, you can still view the restored tags. |
| IJ15074 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Conflict Check window reappears each time you click OK in the window. |
| IJ15069 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the tags for a clearance are automatically shared irrespective of the status of the clearance. |
| IJ15070 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot change the value of the Type field after you save the clearance. |
| IJ13318 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the Application IV Required check box is not editable when the clearance is in the WAPPR status. |
| IJ15068 |
Clearances (Nuc) |
In the Clearances (Nuc) application, all work orders that are signed on to a clearance that has temp lift tags must sign off before you can remove or restore the tags. |
| IJ15072 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you block a work order in a clearance, you cannot specify the user, date, and reason for the blocking in the Block/Unblock Work Orders window. |
| IJ16714 |
Clearances (Nuc) |
In the Clearances (Nuc) application, clearances are moved to a READY state before IV has completed. |
| IJ14861 |
Clearances (Nuc) |
In the Organizations (Nuc) application, a NullPointerException occurs when clicking on Accept Conflicts while moving Clearance to APPR Status using a Workflow process. |
| IJ14897 |
Clearances (Nuc) |
In the Clearances (Nuc) application, changing multiple status values using a workflow causes an BMXAK0112E error. |
| IJ16205 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot apply a tag in a scenario where two clearances are in APPR and two tags for each clearance are configured for the same location and set to DRAFT. |
| IJ15846 |
Purchase Orders (Nuc) |
In the Purchase Orders (Nuc) application, when revising technical terms for a purchase order, the technical terms are updated on the Terms and Conditions tab, but not the POLINE tab. |
| IJ16816 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you select a record and then navigate through the collection of related records using the previous and next buttons, incorrect tags can be displayed for a clearance. For example, if you navigate through a group of records associated with a work order and then advance to a record that includes tags, but is not associated with a work order, when you navigate back to the previous records, they will appear to not be linked to a work order any longer. |
| IJ16597 |
Duty Station Plans (Nuc) |
Key Component details are missing from the Narrative log tab when creating a new Duty Station Plan in the Duty Station Plan (Nuc) application. |
| IJ16713 |
Clearances (Nuc) |
In the Clearances (Nuc) application, if you share clearance tags associated with a work order, and you set the clearance action Modify Work Order Tag Transfer to skip changes, record association can be lost. |
| IJ17415 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, it is not possible to select or view any record in the Rounds tab other than the first record. |
| IJ17525 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot change the status of a clearance from restore to release after you accept a conflict. |
| IJ17477 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you open View/Modify Revision Sequence, tag settings are inconsistent across revisions. |
| IJ17798 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you create a clearance revision, tags with an applied status are not copied to the new revision. |
| IJ17508 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you change the status of a clearance from active to release, an error occurs. |
| IJ17475 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you open the Modify Work Order Tag Transfer dialog, an error occurs when you click ok or cancel if the same dialog is open in another browser session. |
| IJ18453 |
Clearances (Nuc) |
In the Clearances (Nuc) application, the user is unable to change the status of a clearance to a synonym of DRAFT. |
| IJ17578 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot modify the status of a clearance tag that uses a Special Use Location. |
| IJ18483 |
Clearances (Nuc) |
An error occurs when the user issues a clearance in the Clearances (Nuc) application. |
| IJ17589 |
Clearances (Nuc) |
In the Clearances (Nuc) application, when you cancel a clearance revision that has a status of pending, the status does not revert to applied. |
| IJ17507 |
Clearances (Nuc) |
In the Clearances (Nuc) application, you cannot apply a tag before you restore a different tag. |
| IJ17577 |
Clearances (Nuc) |
In the Clearances (Nuc) application, tags are not displayed in the View/Modify Revision Sequence dialog. |
| IJ19125 |
Clearances (Nuc) |
In the Clearances (Nuc) application, an error occurs when cancelling clearances. |
| IJ19713 |
Clearances (Nuc) |
In the Clearances (Nuc) application, clearances are locked during a revision. |
| IJ19875 |
Request for Quotations (Nuc) |
In the Purchase Orders (Nuc) application, terms associated with all items in the contract are copied to the PO. |
| IJ20050 |
Request for Quotations (Nuc) |
In the Purchase Orders (Nuc) application, the PO revision number and terms are not copied from the contract. |
| IJ19967 |
Request for Quotations (Nuc) |
In the RFQ (Nuc) application, RFQs created from a purchase contract do not contain the terms associated with the item. |
| IJ19136 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, readings are scheduled for the wrong due date/cycle week. |
| IJ19625 |
Duty Stations (Nuc) |
In the Duty Stations (Nuc) application, performance issues occur when completing a turnover. |
| IJ21297 |
Work Order Tracking (Nuc) |
In the Work Order Tracking (Nuc) application, inspection forms do not not include the route specified on the work order. |
| IJ20860 |
Preventive Maintenance (Nuc) |
In the Preventive Maintenance (Nuc) application, cancelled work orders appear in the Current WO column. |
| IJ22579 |
Duty Stations (Nuc) |
An error occurs when completing or following up narrative logs after starting a duty station plan. |
| IJ22237 |
Preventive Maintenance (Nuc) |
In the Preventive Maintenance (Nuc) application, an error occurs when running the PMWOGEN crontask. |
Related Information
Was this topic helpful?
Document Information
Modified date:
16 December 2020
UID
ibm16202315