Installing Microsoft Windows NT 4.0 Terminal Server Edition and Citrix MetaFrame v1.8 - Netfinity 7100

Steps

Revision: 1.00
Updated: 05/08/00

Supported systems

• Netfinity 7100 Windows NT 4.0 Server, Terminal Server Edition Installation Media: CD-ROM
• Citrix MetaFrame 1.8 Installation Media: CD-ROM

Use these instructions to install Microsoft Windows NT 4.0, Terminal Server Edition and Citrix MetaFrame version 1.8 on a hard disk drive.

Sections within this document
1.0 What you will need
2.0 Where to download drivers and files
3.0 Installation instructions

1.0 What you will need

Follow the network operating system (NOS) instructions provided in this document in sequential order unless you are instructed differently. The windows and messages might differ from those in this document. Throughout this document the term select is used to denote the use of the arrow keys to highlight a menu selection.

1. If you have a supported hard disk drive, click here to view a list of the applicable options and part numbers for your server.
2. Check the BIOS version that is currently installed on your system; version 1.00 or higher is required.
3. Click here to download the latest BIOS update.
4. Click here to download the Service Processor (Advanced System Management device driver) version 1.15 or higher.
5. Click here to download the S3 Trio-3D Windows NT 4.0 Video Driver Diskette version 3.26.39 or higher.

2.0 Where to download drivers and files

• IBM World Wide Web site: http://www.ibm.com/systems/support
• IBM FTP site: ftp://ftp.software.ibm.com/systems/support/system_x/
• IBM Web site: http://www.ibm.com/systems/support (for countries outside the U.S.)
• Microsoft Web site: http://www.microsoft.com/support/
• Microsoft FTP site: ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/

3.0 Installation instructions
Complete the following procedures to install Windows NT 4.0 Server, Terminal Server Edition, and Service Pack 6. 1.

1. Insert the Windows NT Server 4.0 CD-ROM in the designated drive and restart the server. The system automatically enters the Windows NT Setup, examines the server for components, and the Welcome to Setup window appears.
2. From the Welcome to Setup window, Press Enter. The system develops a list of recognized hardware.
3. Press Enter to accept the recognized hardware in the list.
4. If the system develops a window discussing the number of cylinders on the hard disk drive and the possible need for additional software, press Enter to continue.
5. If the system develop a window that indicates the hard disk drive is empty or the operating system is invalid or corrupted, Press C to continue.
6. Read and accept the License Agreement (page down to the end and Press F8.)
7. When the system develops a new list of the hardware and software components detected, press Enter to accept the list. You will address specific hardware and software information later in this procedure.
8. Partition and format the hard disk drive as desired.
9. Remove the Windows NT Server CD-ROM when you are prompted and press Enter to restart the system.
10. Re-insert the Windows NT Server CD-ROM when you are prompted.
11. When you search for a network adapter, the system develops a new window. Specify the network information as requested.
12. When the Display Settings window appears, accept the standard settings. You will address the video information later in this procedure.
13. Follow the instructions to remove the Windows NT Server 4.0 CD-ROM and restart the system.
14. When the system has restarted completely and the Windows NT desktop appears, insert the Video Driver diskette into the diskette drive.
15. Place the cursor on the desktop background, right-click the background, and then select Properties from the menu.
16. From the Display Properties window, complete the following steps:
    • Press the Settings tab.
    • Press the Display Type button.
    • Press the Change button.
    • Press the Have Disk button.
    • In the box labeled Copy manufacturer's files from, type the path to the display driver as a:\ and press OK.
    • Select S3 Trio from the list of drivers on the CD-ROM, press OK, and press Close.
17. When you are asked if you want to restart the system now, press No You will restart the system later.
18. After the driver has been copied, remove the Video Driver Diskette from the diskette drive and press the Yes button to restart the system.
19. When the system restarts and the"New graphics driver has been detected" message appears, press OK.
20. In the Display Properties window, set the properties for your display and press the Test button to test the new properties.
21. Press the Apply button to see the results. Change the properties if you need to, or press OK to accept the properties.
22. Install the Windows NT Service Pack 6 by using the instructions from the Microsoft Corporation.
23. Restart the system for the changes to take effect.
24. Insert the MetaFrame version 1.8 CD-ROM and Select MetaFrame Setup from the options menu.
25. Refer to the MetaFrame Installation Guide for additional installation and setup information.
26. Install any additional software for your use, such as system administrative, maintenance software or application programs. Your server is ready for use.