Download
Version
3.26.39
Release Date
14 January 2000
Downloadable File
| File link | File size | File description |
|---|---|---|
| 10,356 | README file for the S3 Trio-3D Windows NT 4.0 Video Device Driver Diskette version 3.26.39 | |
| 134,456 | S3 Trio-3D Windows NT 4.0 Video Device Driver Diskette version 3.26.39 |
Abstract
This package contains the Microsoft Windows NT device drivers for the S3 Trio-3D video controller.
This driver is supported on the following systems:
- IBM eServer xSeries 240
- IBM eServer xSeries 250
- IBM eServer xSeries 370
- Netfinity 1000
- Netfin
Download Description
Installation instructions
NOTE: Please view the README file for additional installation instructions.
- Turn on the Microsoft Windows NT system.
- IMPORTANT: When the "Please select the operating system to start..." message is displayed, select Windows NT Workstation Version 4.00 [VGA mode].
- Click Start -> Settings -> Control Panel.
- Double-click the Display icon.
- In the "Settings" screen, click the Display Type... button.
- From the "Display Type" screen, and in the Adapter Type section, click the Change... button.
- In the "Change Display" screen, click the Have Disk... button.
- Insert the new display driver diskette into the A:\ drive, then click the OK button.
- From the list of displayed S3 devices, select your S3 device.
- From "Third-party Drivers", click the Yes button to proceed.
- If a message appears stating the driver is already installed on the system, and asks if you want to use the current or new drivers, be sure to select the New button.
- If prompted for the driver diskette a second time, click the Continue button.
- When the message "The drivers were successfully installed" is displayed, remove the display driver diskette, then click the OK button.
NOTE: Click the Test button prior to rebooting the system to ensure the video driver is properly loaded. - Back at the "Display Type" window, click the Close button.
- Back at the "Display Properties" window, click the Close button.
- When you see the "System Settings Change" window, asking if you wish to restart your computer, click the Yes button to reboot now.
NOTE: If installing Windows NT 4.00 with the S3 device currently installed on the system, proceed through the Windows NT installation as normal. The installation program will prompt the user to choose a display mode. Choose the Cancel button from the "Display Settings" screen to ignore this step for now. The installation will now finish. Once Windows NT has started for the first time, proceed to follow the steps outlined above to install the driver for your S3 device.
Document Location
Worldwide
Was this topic helpful?
Document Information
Modified date:
21 June 2013
UID
ibm1DDSE-3UERA9