Product Documentation
Abstract
What are the supported platforms for the various components of IBM Spectrum Control™ V5.2.8 and later? Where can I install the product? What databases are supported? What operating systems are supported?
Content
|
Database Repository
Server
Agents
Hypervisor
Multipathing
Web Browsers
Jazz for Service Management
IBM Spectrum Control Monitoring Agent for IBM Tivoli Monitoring
Database Repository
IBM® DB2® Enterprise Server Edition (64-bit) | Last Updated: 2017-Sept-20 | ||
Db2 11.1 |
Fix Pack Level
|
Supported
|
Notes
|
Note: Db2 11.1 is supported starting with IBM Spectrum Control 5.2.15 | |||
Installation requirements Upgrade restrictions Known AIX Issues Fix Packs Security Vulnerabilities, HIPER & Special Attention APARs |
GA (Fix Pack 0) |
Yes
|
|
Fix Pack 1 |
Yes
|
||
Fix Pack 2 |
Yes
|
||
Fix Pack 3 |
Yes
|
Db2 APAR IT23421 may be encountered following an upgrade to Db2 11.1 | |
Higher Fix Packs |
Yes
|
Higher Db2 fix pack levels can be used with IBM Spectrum Control. Any issues will be added to this listing as they are identified. | |
DB2 10.5 |
Fix Pack Level
|
Supported
|
Notes
|
Installation requirements Upgrade restrictions Known AIX Issues Fix Packs Security Vulnerabilities, HIPER & Special Attention APARs |
GA (Fix Pack 0) |
Yes
|
The DB2 process for db2syscs.exe might not stop in a timely manner during IBM Spectrum Control uninstallation. End the process and the uninstallation will continue after the DB2 service stops. |
Fix Pack 3 or 3a |
Yes
|
||
Fix Pack 4 |
Yes
|
DB2 APAR IT04326 may be encountered and consume additional memory while running IBM Spectrum Control. It is resolved with DB2 10.5 FP5. | |
Fix Pack 5 |
Yes
|
||
Fix Pack 6 |
Yes
|
||
Fix Pack 7 |
Yes
|
||
Fix Pack 8 |
Yes
|
||
Higher Fix Packs |
Yes
|
Higher DB2 fix pack levels can be used with IBM Spectrum Control. Any issues will be added to this listing as they are identified. | |
DB2 10.1 |
Fix Pack Level
|
Supported
|
Notes
|
Note: DB2 10.1 end of support (EOS) is September 30, 2017. IBM Spectrum Control 5.2.13 is the last release that supports installation on DB2 10.1. Spectrum Control 5.2.14 and later are not supported on DB2 10.1. For more information see the DB2 Distributed end of support dates: http://www-01.ibm.com/support/docview.wss?uid=swg21168270 |
|||
Installation requirements Upgrade restrictions Known AIX Issues Fix Packs |
Fix Pack 1 or earlier |
No
|
Not supported |
Fix Pack 2 |
Yes
|
DB2 APAR IC86835 may be encountered and affect retrieving data from the IBM Spectrum Control database. | |
Fix Pack 3 or 3a |
Yes
|
||
Fix Pack 4 |
Yes
|
db2profile must be sourced prior to starting the IBM Spectrum Control installation. | |
Fix Pack 5 |
Yes
|
||
Fix Pack 6 |
Yes
|
Server
By Platform: AIX, Linux, Windows, VM on Hyper-V, VM on KVM, VM on VMware |
|
Platform
|
Last Updated: 2018-May-31 |
IBM AIX® |
Server
|
AIX 6.11 (64-bit) -POWER5 -POWER6 -POWER7 -POWER7+ |
Yes2
|
AIX 7.11 (64-bit) -POWER5 -POWER6 -POWER7 -POWER7+ -POWER8 |
Yes
|
AIX 7.2 (64-bit) -POWER7 -POWER8 |
Yes
5.2.10+ |
AIX VIOS |
No
|
AIX VIO Client |
Yes
|
AIX Server Notes: 1 Minimum AIX levels:
You can determine the Technology Level and Service Pack installed by running the oslevel -s command. Select any necessary fixes and download packages from Fix Central.If you install Jazz for Service Management with IBM Spectrum Control on AIX 7.1TL3 (SP0-1), you must first apply the fix for AIX APAR IV52745. You can download the fix for APAR IV52745 at the following location: ftp://aix.software.ibm.com/aix/ifixes/iv52745/ 2 AIX 6.1 end of support (EOS) was April 30, 2017, therefore IBM Spectrum Control is removing support for this particular version of AIX for future versions of Spectrum Control and TPC. IBM Spectrum Control 5.2.13 is the last release that will provide Server support for AIX 6.1. For more information see the AIX support lifecycle information: http://www-01.ibm.com/support/docview.wss?uid=isg3T1012517 |
|
Linux® |
Server
|
Red Hat Enterprise Linux Base Server and Advanced Platform 5 (x86-64) |
No4
|
Red Hat Enterprise Linux Base Server and Advanced Platform 6 (x86-64) |
Yes1
|
Red Hat Enterprise Linux 7 (x86-64) |
Yes2
5.2.10+ |
SuSE Linux Enterprise Server 11 (x86-64) |
No3
|
Linux Server Notes: 1 A minimum version of RHEL 6.7 is required. Review the Red Hat Enterprise Linux Life Cycle for end of support dates: https://access.redhat.com/support/policy/updates/errata/ 2 RHEL 7 is supported for the server component starting with IBM Spectrum Control 5.2.10. This does not include Jazz for Service Management. Refer to the Jazz for Service Management Knowledge Center for more details regarding hardware and software requirements. A minimum version of RHEL 7.3 is required. Review the Red Hat Enterprise Linux Life Cycle for end of support dates: https://access.redhat.com/support/policy/updates/errata/ 3 IBM Spectrum Control 5.2.10 is the last release that will provide Server support on SuSE Linux. Upgrades of 5.2.x installations to 5.2.13 and earlier are allowed on SuSE Linux. New installations of IBM Spectrum Control Server on SuSE Linux are not supported with 5.2.11 and later. 4 Red Hat has ended support for version 5 of Enterprise Linux product, therefore IBM Spectrum Control has removed support for this version of Linux for current and previous versions of Spectrum Control and TPC. For more information see the Life-Cycle section on this web page: https://access.redhat.com/support/policy/updates/errata/ |
|
Microsoft Windows™ |
Server
|
Windows Server 2008 (x86-64) -Standard Edition -Enterprise Edition |
Yes
|
Windows Server 2008 R22 (x86-64) -Standard Edition -Enterprise Edition |
Yes2
|
Windows Server 2012 (x86-64) -Standard Edition |
Yes
|
Windows Server 2012 R21 -Standard Edition |
Yes1
|
Windows Server 20163 -Standard Edition |
Yes3
|
Windows Server Notes: 1 Windows 2012 R2 support requires a minimum version of DB2 10.1 FP4. The Jazz for Service Management 1.1.0.3 installation may present a system prerequisite warning with a failure for Windows 2012 R2 in the details. This can be ignored. Some users have reported that they needed to modify the ODP.cfg file to install on Windows 2012 R2. Refer to the Jazz for Service Management Knowledge Center for more details regarding hardware and software requirements. 2 Apply Microsoft KB2577795 to avoid kernel socket leaks with the IBM Spectrum Control on Windows 2008 R2. You can check whether it is installed using the following command: wmic qfe | find "KB2577795" 3 Windows 2016 support requires a minimum version of Db2 11.1 (supported starting with IBM Spectrum Control 5.2.15). The Jazz for Service Management 1.1.0.3 installation may present a system prerequisite warning with a failure for Windows 2016 in the details. This can be ignored. Some users have reported that they needed to modify the ODP.cfg file to install on Windows 2016. Refer to the Jazz for Service Management Knowledge Center for more details regarding hardware and software requirements. |
|
VM on Hyper-V |
Server
|
Microsoft Hyper-V |
Yes
See corresponding operating system |
VM on KVM |
Server
|
KVM 2.0 (x86-64) |
Yes
See corresponding operating system |
VM on VMware |
Server
|
VMware ESX and ESXi 4.0.x, 4.1.x, 5.0.x, 5.1.x, 5.5.x, 6.0.x, 6.5.x |
Yes
See corresponding operating system |
Agents
By Platform: AIX, HP-UX, Linux, Solaris, VM on Hyper-V, VM on KVM, VM on VMware, Windows |
||||
Platform
|
Last Updated: 2018-May-31 | |||
AIX |
Storage
Resource Agent |
Clustering
|
File Systems
|
Volume Managers
|
AIX 6.11 (64-bit) -POWER4 -POWER5 -POWER6 -POWER7 -POWER7+ |
Yes1
|
|
|
|
AIX 7.11 (64-bit) -POWER5 -POWER6 -POWER7 -POWER7+ -POWER8 |
Yes1
|
|||
AIX 7.2 (64-bit) -POWER7 -POWER8 |
Yes
|
|||
AIX VIOS 2.1, 2.2 |
Yes
|
|||
AIX VIO Client |
Yes4
|
|||
AIX Agent Notes: 1 · For AIX 6.1, the minimum maintenance levels required are: Technology Level 6100-04 Service Pack 5 Technology Level 6100-05 Service Pack 1 Technology Level 6100-06 · For AIX 7.1, the minimum maintenance levels required are: Technology Level 7100-00 (excluding Service Pack 3) Technology Level 7100-01 Service Pack 2 You can determine the Technology Level and Service Pack installed by running the oslevel -s command. Select any necessary fixes and download packages from Fix Central.2 Support exists for file systems and volumes created through Veritas File System (VxFS) and Veritas Volume Manager (VxVM) release 4.x, 5.x, as long as those file systems and volumes conform to file systems and volumes created with version 3.x of VxFS and VxVM. Volumes and file systems with new features specifically introduced with VxFS and VxVM release 4.x, 5.x cannot be used. 3 APAR IV15087 for PowerHA 6 is required. Refer to the PowerHA for AIX version compatibility matrix for further details regarding PowerHA requirements. 4 The following limitations exist for a Storage Resource agent installed on the AIX VIO client.:
5 The Storage Resource agent for IBM AIX is a native 64-bit application and cannot be used on 32-bit operating systems. |
||||
HP-UX |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
HP-UX 11i v3 (B.11.31) -Itanium 64-bit Legacy mode only1 |
Yes
|
None
|
|
|
HP-UX Agent Notes: 1 HP-UX hosts must have legacy mode enabled to be used with the Storage Resource A agent. If it is not enabled, the Storage Resource agent will fail to install. See HP documentation for further details. 2 Support exists for file systems and volumes created through Veritas File System (VxFS) and Veritas Volume Manager (VxVM) release 4.x, 5.x, as long as those file systems and volumes conform to file systems and volumes created with version 3.x of VxFS and VxVM. Volumes and file systems with new features specifically introduced with VxFS and VxVM release 4.x, 5.x cannot be used. 3 The Storage Resource agent for HP-UX is a 32-bit application that can run in compatibility mode on hosts with 64-bit processors. |
||||
Linux3, 5 |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
Red Hat Enterprise Linux Base Server and Advanced Platform 5 4 -x86-64 -POWER5 (32-bit, 64-bit) -POWER6 (32-bit, 64-bit) -POWER7 (32-bit, 64-bit) -POWER7+ (32-bit, 64-bit) -zSeries (31-bit, 64-bit) |
No4
|
None
|
|
|
Red Hat Enterprise Linux Base Server and Advanced Platform 6 5, 6 -x86-64 -POWER5 (32-bit, 64-bit) -POWER6 (32-bit, 64-bit) -POWER7 (32-bit, 64-bit) -POWER7+ (32-bit, 64-bit) -POWER8 (32-bit, 64-bit -zSeries (31-bit, 64-bit) |
Yes
|
|||
Red Hat Enterprise Linux Server 7 5, 6 -x86-64 -POWER5 (64-bit) -POWER6 (64-bit) -POWER7 (64-bit) -POWER7+ (64-bit) -POWER8 (64-bit) -zSeries (64-bit) |
Yes
|
|||
SuSE Linux Enterprise Server 11 5 -x86-64 -POWER5 (32-bit, 64-bit) -POWER6 (32-bit, 64-bit) -POWER7 (32-bit, 64-bit) -POWER7+ (32-bit, 64-bit) -POWER8 (32-bit, 64-bit) -zSeries (31-bit, 64-bit) |
Yes
|
None
|
|
|
Linux Agent Notes: 1 Support exists for file systems and volumes created through Veritas File System (VxFS) and Veritas Volume Manager (VxVM) release 4.x, 5.x, as long as those file systems and volumes conform to file systems and volumes created with version 3.x of VxFS and VxVM. Volumes and file systems with new features specifically introduced with VxFS and VxVM release 4.x, 5.x cannot be used. 2 IBM Spectrum Scale is not a supported file system for Storage Resource agents running on Linux on zSeries. 3 The Storage Resource agent for Linux (excluding the IBM Power and IBM zSeries architectures) is a native 64-bit application and cannot be used on 32-bit operating systems. For IBM Power and zSeries architectures, it is a 32-bit application that can run in compatibility mode on hosts with 64-bit processors, requiring the 32-bit compat-libstdc++-33 RPM. 4 Red Hat has ended support for version 5 of Enterprise Linux product, therefore IBM Spectrum Control has removed support for this version of Linux for current and previous versions of Spectrum Control and TPC. For more information see the Life-Cycle section on this web page: https://access.redhat.com/support/policy/updates/errata/ 5 The supported Linux operating systems on Power are big endian. 6 Minimum version of RHEL required: RHEL 6.7 or RHEL 7.3. Review the Red Hat Enterprise Linux Life Cycle for end of support dates: https://access.redhat.com/support/policy/updates/errata/ |
||||
Solaris |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
Oracle Solaris 9 (32-bit, 64-bit) -SPARC |
No1,5
|
None
|
|
|
Oracle Solaris 10 (32-bit, 64-bit) -SPARC |
Yes2, 4
|
|||
Oracle Solaris 11 (32-bit, 64-bit) -SPARC |
Yes2, 4
|
|||
Solaris Agent Notes: 1 To install Storage Resource agents on Solaris 9, patches 111711 and 111712 are required. You can download Solaris patches from Oracle. 2 For Solaris 10 and Solaris 11, only Global Zone is supported for the Storage Resource agents. The Non-Global (or local) zones are NOT supported. If you upgrade from Solaris 9 to Solaris 10, all agents need to be reinstalled completely. 3 Support exists for file systems and volumes created through Veritas File System (VxFS) and Veritas Volume Manager (VxVM) release 4.x, 5.x, as long as those file systems and volumes conform to file systems and volumes created with version 3.x of VxFS and VxVM. Volumes and file systems with new features specifically introduced with VxFS and VxVM release 4.x, 5.x cannot be used. 4 Solaris ZFS is not supported for the Storage Resource agents. 5 The Storage Resource agent for Solaris is a 32-bit application that can run in compatibility mode on hosts with 64-bit processors. 5 Oracle has ended support for Solaris 9 Operating System, therefore IBM Spectrum Control is removing support for this particular version of Solaris for current and previous versions of Spectrum Control and TPC. For more information see this web page: http://www.oracle.com/technetwork/server-storage/solaris10/overview/index-138972.html |
||||
VM on Hyper-V |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
Microsoft Hyper-V Guest OS: -Any |
No
|
N/A
|
N/A
|
N/A
|
VM on KVM |
Storage Resource Agent
|
Clustering
|
File System
|
Volume Managers
|
KVM 2.0 (x86-64) Guest OS: -Red Hat Enterprise Linux 6 -Red Hat Enterprise Linux 7 -SuSE Linux Enterprise Server 11 -Windows Server 2008 -Windows Server 2008 R2 -Windows Server 2012 -Windows Server 2012 R2 -Windows Server 2016 |
Yes1
|
See corresponding operating system.
|
||
VM on KVM Agent Notes: 1 Total Disk Space and Available Disk Space cannot be determined with the Storage Resource Agents for any guest operating systems. |
||||
VM on VMware |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
VMware ESX and ESXi 4.0.x, 4.1.x, 5.0.x, 5.1.x, 5.5.x, 6.0.x, 6.5.x Guest OS : -Red Hat Enterprise Linux 6 -Red Hat Enterprise Linux 7 -SuSE Linux Enterprise Server 11 -Windows Server 2008 -Windows Server 2008 R2 -Windows Server 2012 -Windows Server 2012 R2 -Windows Server 2016 |
Yes
See corresponding operating system row for hardware support. |
See corresponding operating system.
|
||
VMware VI & VSphere |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
vSphere ESX and ESXi |
N/A
|
N/A
|
N/A
|
|
Windows |
Storage Resource Agent
|
Clustering
|
File Systems
|
Volume Managers
|
Windows Server 2008 (x86-64) -Datacenter Edition -Enterprise Edition -Standard Edition |
Yes
|
|
|
None
|
Windows Server 2008 R2 (x86-64) -Datacenter Edition -Enterprise Edition -Standard Edition |
Yes
|
|||
Windows Server 2012 (x86-64) -Datacenter Edition -Standard Edition |
Yes
|
|||
Windows Server 2012 R2 (x86-64) -Datacenter Edition -Standard Edition |
Yes
|
|||
Windows Server 2016 (x86-64) -Datacenter Edition -Standard Edition |
Yes
|
|||
Windows Agent Notes: Disks using GUID partition table (GPT) partition style are supported. The Storage Resource agent for Microsoft Windows is a native 64-bit application and cannot be used on 32-bit operating systems. |
Hypervisor monitoring support
Last updated: 2018-Feb-7 | |||
Vendor
|
Supported Platform
|
Supported Function
|
Supported Storage Systems |
VMWare3 | ESXi Server 6.5.x2 | Monitoring LUN Correlation VASA and Web Client extensions1 |
3PAR EMC CLARiiON EMC Symmetrix HDS 9xxxx HP EVA IBM DS4000 IBM DS5000 IBM DS8000 IBM DS6000 IBM ESS IBM N3000 IBM N5000 IBM N7000 IBM Storwize V7000 IBM Storwize V7000U IBM SVC IBM XIV |
vCenter 6.5.x2 | |||
ESXi Server 6.0.x2 | |||
vCenter 6.0.x2 | |||
ESXi Server 5.5.x | |||
vCenter 5.5.x | |||
ESXi Server 5.1.x | |||
vCenter 5.1.x | |||
ESXi Server 5.0.x | |||
vCenter 5.0.x | |||
ESX Server 4.1.x | |||
ESXi Server 4.1.x | |||
vCenter 4.1.x | |||
ESX Server 4.0.x | |||
ESXi Server 4.0.x | |||
vCenter 4.0.x | |||
Hypervisor Monitoring Notes: 1 VASA and Web Client extension support is available with vCenter 5.1 and 5.5 only. 2 Environments with with vSphere Virtual Volumes (vVol) are not supported. 3 The free edition of ESXi is not supported since the vSphere API is read-only. Additional information is available here: https://blogs.vmware.com/vsphere/2012/02/introduction-to-the-vsphere-api-part-1.html |
Multipathing
Last updated: 2015-Dec-11 | |||
Multipathing Product | Platform | Minimum Version2 | Supported Features1 |
SDDDSM4 | Windows | 2.1.3.0-1 for 32-bit machines 2.2.0.0-11 for 64-bit machines |
All |
SDDPCM4 | AIX | 2.2.0.x | All |
3.0.0.x | All | ||
AIX Multipath I/O | AIX | 2.2.0.x | Probe Path Status |
3.0.0.x | |||
DM-Multipath | Red Hat 6 | device-mapper-1.02.47-1.el6 multipath-tools-0.4.9-19.el6 |
Full support3 |
Red Hat 5 | device-mapper-1.02.13-1.el5 multipath-tools-0.4.7-8.el5 |
Full support3 | |
SLES 11 | device-mapper-1.02.27-8.6 multipath-tools-0.4.8-40.1 |
Full support3 | |
EMC Powerpath | AIX | 4.x | Probe |
Linux | 4.x | Probe | |
Windows | 4.x | Probe | |
HP-UX Native Multipath | HP-UX | 11iV3 | Planner |
Microsoft Multipath I/O (MPclaim) | Windows | Any | Probe Path Status |
Multipathing Notes: 1 Supported features for IBM Spectrum Control include the following:
2 Additional information regarding version support for SDDDSM, SDDPCM, and DM-Multipath can be found on the System Storage Multipath Subsystem Device Driver support site. 3 Path status monitoring with Linux MPIO drivers is available only for Linux x86-64. 4 IBM SDDDSM and SDDPCM do not support all devices, such as XIV. The Microsoft and AIX MPIO drivers do. |
Web Browsers
Last Updated: 2018-June-5 | |
Browsers | All Components1 |
Google Chrome2 | 34 and higher |
Mozilla Firefox | All ESR versions
- minimum ESR 31 for 5.2.11+ |
Microsoft Internet Explorer | 10 & 11 3
- minimum 11 for 5.2.11+ |
Web Browser Notes:
1 Jazz for Service Management and the Tivoli Common Reporting component, including Cognos, are included in the certified listing for All Components. Cognos 10.2.x Report Studio does not support Firefox 57 "Quantum" browser. Review Cognos APAR PI90438 for more information. 2 Data in the resource tables for Servers, Storage, Fabrics or Hypervisors pages will not load in the Chrome web browser when zoomed to levels of 110%, 90%, 67% or 33%. All other zoom levels work properly. This also affects information under Home (Performance Monitors, Alerts, Tasks) and Groups (Applications/Departments). 3 To create and work with Cognos reports using Internet Explorer version 10 or 11, you must turn on Compatibility View in the browser. If Compatibility View is off, you will see error CM-REQ-4158. |
Jazz™ for Service Management
Note: Cognos 10.2 end of support (EOS) was April 30, 2018
Cognos Business Intelligence Reporting 10.2.x, along with Jazz for Service Management and the Tivoli Common Reporting component, are now end of service. The information below is for historical reference only. IBM Spectrum Control 5.2.15.2 is the last release that supports Cognos 10.2.x. IBM Spectrum Control 5.2.16 and later support Cognos Analytics 11. For more information see the Cognos end of support dates: https://www.ibm.com/software/support/lifecycleapp/PLCDetail.wss?q45=L030160L12183F00
For information on Cognos Analytics 11, see:
https://www.ibm.com/support/knowledgecenter/SSEP7J_11.0.0/com.ibm.swg.ba.cognos.cbi.doc/welcome.html
Last Updated: 2018-June-5 | ||
Version | Operating Systems | Components |
1.1.0.3
|
IBM AIX®3 Linux® 5 Microsoft Windows™ |
Reporting Services1 Security Services2 |
Jazz for Service Management Notes: 1 Install the Reporting Services component if you want to use Cognos BI reports. 2 Install the Security Services to configure supported IBM storage devices (DS8K and SVC family) with LDAP authentication and to enable single sign-on from IBM Spectrum Control to these supported devices. 3 If you install Jazz for Service Management with IBM Spectrum Control on AIX 7.1TL3 (SP0-1), you must first apply the fix for AIX APAR IV52745. You can download the fix for APAR IV52745 at the following location: ftp://aix.software.ibm.com/aix/ifixes/iv52745/ 4 Jazz for Service Management is not supported on POWER8. 5 Jazz for Service Management is not supported on RHEL 7. Refer to the Jazz for Service Management Knowledge Center for more details regarding hardware and software requirements. For more information about the Jazz for Service Management hardware and software requirements, see the Knowledge Center. |
IBM Spectrum Control Monitoring Agent for IBM Tivoli Monitoring
Last Updated: 2017-Aug-30 | ||||
AIX | HP-UX | Linux | Solaris | Windows |
6.1 7.1 |
Not supported | RHEL 6 -x86, PPC, zSeries SLES 11 -x86, x86-64, zSeries |
Not supported | 2008 2008 R2 2012 2012 R2 |
IBM Spectrum Control Monitoring Agent for IBM Tivoli Monitoring Notes: Before using the IBM Spectrum Control Monitoring Agent for IBM Tivoli Monitoring, you must have IBM Tivoli Enterprise Monitoring Server installed. For information about the IBM Tivoli Enterprise Monitoring Server, see the Information Center for 6.3. |
IBM, the IBM logo, and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.
Original Publication Date
14 November 2014
Related Information
[{"Product":{"code":"SS5R93","label":"IBM Spectrum Control"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"--","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF010","label":"HP-UX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"5.2.8;5.2.9;5.2.10;5.2.11;5.2.12;5.2.13;5.2.14;5.2.15;5.2.16;5.2.17","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}},{"Product":{"code":"SS5R93","label":"IBM Spectrum Control"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":" ","Platform":[{"code":"","label":""}],"Version":"5.2.8;5.2.9;5.2.10;5.2.11;5.2.12;5.2.13;5.2.14;5.2.15;5.2.16","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}}]
Was this topic helpful?
Document Information
Modified date:
22 February 2022
UID
swg27047043