DIMM installation movie - IBM System x3650

Content

• Movie player help

To install a DIMM:

1. Ensure that the retention latches are open.
2. Insert the DIMM straight into the slot, pressing down on both corners of the DIMM at the same time until secured by the latches.

Install the DIMM Air Baffle:

1. Position the baffle into the system using the slot in the chassis for alignment and press down until secured by the latch
   
   Here is a closer look at the slot in the chassis and the tabs on the air baffle.

Install the Riser Card Assembly:

1. Insert the Riser Card Assembly into the chassis using the latching tabs and the channels on the chassis for alignment then gently push down until secured by the latches.
   
   Here's a closer look at one of the channels on the chassis.
   Here is a closer look at the front alignment latching tab.

Install the Cover:

1. Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
2. Slide the cover forward while rotating the cover release latch to the closed position.
   
   Here's a closer look at the cover tab and the slot in the chassis.

• Problem Determination and Service Guide