Verifying completion of manual installation

Follow these steps to verify that you have successfully completed the IBM® i upgrade by using the manual installation method.

The Work with Licensed Programs display appears. Use the page down or roll up key to see the third display of the Work with Licensed Programs menu.
Type 50 and press Enter.

The Display Install History display appears. The XX's indicate default values.

                         Display Install History
 
Type choices, press enter.
 
  Start date . . . . . .    XX/XX/XX   MM/DD/YY
 
  Start time . . . . . .    XX:XX:XX   HH:MM:SS
 
  Output . . . . . . . .    *_______   *, *PRINT

Press Enter.

Look at the messages that appear on the Display History Log Contents display.
- If you had an installed licensed program that was not renewed by IBM, it might not be replaced. Refer to Mixed-release environment for more information.
- If any of the messages on the display indicate a failure or a licensed program that is partially installed, go to Troubleshooting software installation problems to determine the problem.
Otherwise, press F3 (Exit).
Verify the installed status values of your licensed programs and check for compatibility. It is important to make sure that all of your licensed programs are compatible with the operating system.
Use LICPGM menu option 10 (Display licensed programs) to see the release and installed status values of the installed licensed programs. If the installed status value of a licensed program is *COMPATIBLE, it is ready for use. If the installed status value of a licensed program is *BACKLEVEL, the licensed program is installed, but its version, release, and modification is not compatible with the currently installed level of the operating system. Check the topic Licensed program releases and sizes to verify the current version, release, and modification of the licensed program. Installed status values lists the possible installed status value descriptions.

You have completed this task.

Do you need to install additional licensed programs?
- No. Go to the next step.
- Yes. Go to Installing additional licensed programs and complete the instructions.
Do you need to install a secondary language?
- No. Go to the next step.
- Yes. Go to Installing a secondary language and complete the instructions.
You must complete the installation process before you put your system into operation. Go to Checklist: Completing the IBM i upgrade or replacement and complete the instructions.